Influence of electroless nickel-plating on fracture toughness of pitch-based carbon fibre reinforced composites

摘要

Nickel-Pitch-based carbon fibres (Ni-PFs) were prepared by electroless nickel-plating to enhance fracture toughness of Ni-PFs reinforced epoxy matrix composites (Ni-PFs/epoxy). The surface properties of Ni-PFs were determined by scanning electron microscopy (SEM), X-ray photoelectron spectrometry (XPS), and X-ray diffraction (XRD). The fracture toughness of the Ni-PFs/epoxy was assessed by critical stress intensity factor (K-IC) and critical strain energy release rate (G(IC)). The fracture toughness of Ni-PFs/epoxy was enhanced compared to those of PFs/epoxy. These results were attributed to the increase of the degree of adhesion at interfaces between Ni-PFs and matrix resins in the composites. (C) 2015 Elsevier Ltd. All rights reserved.