首页> 外文期刊>Composites >Synergistic of ammonium polyphosphate and alumina trihydrate as fire retardants for natural fiber reinforced epoxy composite
【24h】

Synergistic of ammonium polyphosphate and alumina trihydrate as fire retardants for natural fiber reinforced epoxy composite

机译:聚磷酸铵和三水合氧化铝作为天然纤维增强环氧复合材料的阻燃剂的协同作用

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Various compositions of epoxy/hardener with flame retardant (FR) as additives were used to produce natural fiber composite through the resin infusion technique. The effects of natural fiber (NF), ammonium polyphosphate (APP), alumina trihydrate (ATH) and ATH/APP hybrid on flammability, thermal and mechanical properties of the composites were investigated. Incorporation of NF into neat epoxy matrix reduced the gross heat of combustion with improved thermal degradation properties. Addition of APP enhanced the flame resistant properties of the composite with a much reduced total flame time and zero drip. The 10 wt.% ATH and 5 wt.% APP hybrid showed the most promising flame retardancy with a self extinguishing property as well as the lowest gross heat and greatest char residue amongst the various formulations investigated. In general, the formulations containing only ATH couldn't provide the effective flame resistivity as compared to that of the APP-filled composites. The ATH-filled formulations reduced the tensile strength, elongation at break and flexural properties while an increase in the flexural strength of APP-loaded formulations was observed. An increase in moduli of the FR-filled composites was measured as compared to that of the NF/epoxy composite, owing to a more brittle characteristic. (C) 2017 Elsevier Ltd. All rights reserved.
机译:通过树脂灌注技术,使用具有阻燃剂(FR)作为添加剂的环氧/硬化剂的各种成分来生产天然纤维复合材料。研究了天然纤维(NF),聚磷酸铵(APP),三水合氧化铝(ATH)和ATH / APP杂化物对复合材料的可燃性,热性能和机械性能的影响。将NF掺入纯净的环氧基质中可降低燃烧总热量,并具有改善的热降解性能。 APP的加入增强了复合材料的阻燃性能,大大减少了总火焰时间,零滴落。在所研究的各种配方中,具有10%(重量)的ATH和5%(重量)的APP杂化物表现出最有希望的阻燃性,具有自熄性,并且具有最低的总热量和最大的残炭。通常,与填充APP的复合材料相比,仅包含ATH的配方无法提供有效的阻燃性。 ATH填充配方降低了拉伸强度,断裂伸长率和挠曲性能,而APP加载配方的抗弯强度却有所提高。由于较脆的特性,与NF /环氧树脂复合材料相比,测量了FR填充复合材料的模量增加。 (C)2017 Elsevier Ltd.保留所有权利。

著录项

  • 来源
    《Composites》 |2017年第4期|101-110|共10页
  • 作者单位

    Univ Nottingham, Dept Mech Mat & Mfg Engn, Malaysia Campus,Jalan Broga, Semenyih 43500, Selangor, Malaysia;

    Univ Nottingham, Dept Mech Mat & Mfg Engn, Malaysia Campus,Jalan Broga, Semenyih 43500, Selangor, Malaysia;

    Univ New Orleans, Dept Mech Engn, New Orleans, LA 70138 USA;

    Univ Nottingham, Dept Mech Mat & Mfg Engn, Malaysia Campus,Jalan Broga, Semenyih 43500, Selangor, Malaysia;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Hybrid; Polymer-matrix composites (PMCs); Mechanical properties; Thermal properties; Thermosetting resin;

    机译:杂化;聚合物基复合材料(PMC);机械性能;热性能;热固性树脂;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号