Experimental and analytical study on strengthening of reinforced concrete T-beams in shear using steel reinforced grout (SRG)

摘要

The use of steel reinforced grout (SRG) has emerged as a promising technique for the strengthening and retrofitting of reinforced concrete (RC) structures, however, the experimental evidence on its application for shearcritical RC beams is rather limited. Accordingly, this study focuses on the structural performance of SRG-strengthened RC beams critical in shear. At this aim, an experimental investigation has been conducted on eleven RC T cross-section beams. Eight beams were strengthened with different types of SRG (different for the density, namely 1.57 and 3.14 cords per centimeter) comprised of ultra-high tensile strength steel fabrics, and three, which were unstrengthened, were used as reference specimens. The test parameters investigated were as follows: (a) steel fabric density, (b) bond scheme, and (c) amount of internal shear reinforcement within the critical shear span, SRG/stirrups interaction. The experimental results revealed the high potential of SRG system for the strengthening of shear-critical RC beams. It has significantly improved the shear capacity and deformation characteristics of the strengthened beams. The percentage increase in the load-carrying capacity over the reference beam of up to 71% was observed. In addition, an analytical model based on the simplified modified compression field theory (SMCFT) has been proposed to predict the shear capacity of SRG-strengthened beams. The SMCFT-based model has resulted in an accurate and safe prediction of the shear capacity of the SRG-strengthened beams with an average ratio of V-th/V-ex, of 0.92 and a standard deviation of 4.07%.