Closed-form analysis of the buckling loads of composite laminates under uniaxial compressive load explicitly accounting for bending-twisting-coupling

摘要

This paper presents a method for the determination of the buckling loads of symmetrically laminated composite plates under uniaxial compressive load with explicit consideration of bending twisting-coupling (BTC). The plates under consideration are assumed to be thin and balanced with a symmetric stacking sequence and consist of layers with ply orientations of {0 degrees/+/- 45 degrees/90}, but otherwise arbitrary lamination schemes. The characteristic laminate quantities are described in a non-dimensional notation in order to capture all combinations of material and stacking sequences that are physically possible. Plates with rectangular planforms in the framework of Classical Laminate Theory (CLT) under several different sets of boundary conditions are considered, and the buckling problem of such composite laminated plates is solved in an approximate manner by using the classical Rayleigh Ritz method. Several combinations of the boundary conditions 'simply supported' and 'clamped' are analyzed, and the obtained results are compared with finite-element simulations for verification purposes. Based on the computed data, two different design equations for sufficiently long plates are developed which allow for a rapid and closed-form analytical assessment of the buckling behavior of symmetrically layered composite plates under explicit consideration of bending twisting coupling. It is found that the closed-form analytical analysis equations are simple in their application and yet still work with very satisfying accuracy which makes them very suitable for use in practical engineering work. (C) 2015 Elsevier Ltd. All rights reserved.