...
首页> 外文期刊>Combustion and Flame >Ignition delay characteristics of RP-3 under ultra-low pressure (0.01-0.1 MPa)
【24h】

Ignition delay characteristics of RP-3 under ultra-low pressure (0.01-0.1 MPa)

机译:RP-3在超低压(0.01-0.1 MPa)下的点火延迟特性

获取原文
获取原文并翻译 | 示例
           

摘要

Shock tube is used to study the ignition delay of RP-3 under ultra-low pressure (0.01-0.1 MPa). The ignition delay of RP-3/O-2/N-2 mixture is obtained with the characteristic emission signal of OH* radical at 306.5 nm and the pressure signal near the end of the driven section. The pressure range is from 0.01 MPa to 0.1 MPa, the temperature range is from 1113 K to 1600 K, and the equivalence ratio range is from 0.5 to 1.5. The influence of temperature, pressure, and equivalence ratio on the ignition delay characteristics of RP-3 is investigated. Results show that the increase in temperature and pressure and the decrease in equivalence ratio shorten the ignition delay time. The fitting formula of the relationship between the ignition delay time of RP-3 and temperature, pressure, and equivalence ratio under low pressure is obtained, and the results are verified by experimental data. (C) 2019 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
机译:冲击管用于研究RP-3在超低压(0.01-0.1 MPa)下的点火延迟。通过OH *自由基在306.5 nm处的特征发射信号和在驱动部分末端附近的压力信号,可以获得RP-3 / O-2 / N-2混合物的点火延迟。压力范围为0.01MPa至0.1MPa,温度范围为1113K至1600K,当量比范围为0.5至1.5。研究了温度,压力和当量比对RP-3点火延迟特性的影响。结果表明,温度和压力的升高以及当量比的降低缩短了点火延迟时间。得到了RP-3点火延迟时间与低压下的温度,压力和当量比之间关系的拟合公式,并通过实验数据进行了验证。 (C)2019燃烧研究所。由Elsevier Inc.出版。保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号