...
首页> 外文期刊>Circuits and systems >An Enhanced Bulk-Driven Folded-Cascode Amplifier in 0.18 urn CMOS Technology
【24h】

An Enhanced Bulk-Driven Folded-Cascode Amplifier in 0.18 urn CMOS Technology

机译:采用0.18 umn CMOS技术的增强型批量驱动折叠共源共栅放大器

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

A new configuration of Bulk-Driven Folded-Cascode (BDFC) amplifier is presented in this paper. Due to this modifying, significant improvement in differential DC-Gain (more than 11 dB) is achieved in compare to the conventional structure. Settling behavior of proposed amplifier is also improved and accuracy more than 8 bit for 500 mV voltage swing is obtained. Simulation results using HSPICE Environment are included which validate the theoretical analysis. The amplifier is designed using standard 0.18 um CMOS triple-well (level 49) process with supply voltage of 1.2 V. The correct functionality of this configuration is verified from -50℃ to 100℃.
机译:本文提出了一种新的批量驱动折叠级联(BDFC)放大器配置。由于这种修改,与常规结构相比,差分DC增益(大于11 dB)得到了显着改善。拟议放大器的建立性能也得到了改善,对于500 mV的电压摆幅,其精度超过8位。包括使用HSPICE环境的仿真结果,可以验证理论分析。该放大器采用标准的0.18 um CMOS三阱(49级)工艺设计,电源电压为1.2V。该配置的正确功能在-50℃至100℃范围内得到验证。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号