首页> 外文期刊>Circuits, Devices & Systems, IET >Dual-source hysteretic switched-inductor 0.18 µm complementary metal–oxide–semiconductor charger-supply system
【24h】

Dual-source hysteretic switched-inductor 0.18 µm complementary metal–oxide–semiconductor charger-supply system

机译:双源迟滞开关电感器0.18 µm互补金属氧化物半导体充电器-电源系统

获取原文
获取原文并翻译 | 示例

摘要

Although miniaturised fuel cells store more energy than lithium-ion batteries and super capacitors, they source less power, which means they cannot power as many functions. Their power-dense counterparts, however, cannot sustain life for long, which is why mixing technologies is appealing. Still, microsystems are tiny and react quickly, so their supply circuits must also be small and fast. For this reason, the dual-source hysteretic single-inductor 0.18 µm complementary metal–oxide–semiconductor charger-supply system presented and discussed here draws constant power from an energy-dense source and supplementary power from a rechargeable power-dense battery. The prototyped system supplies and responds to 1–4 mA load dumps within one or two clock cycles with 73% peak efficiency and recharges the battery with excess power from the energy-dense source. When managed to draw supplementary power from a battery this way and loaded with a microsystem that idles at 10 μW and peaks to 4 mW, as in the case of typical wireless sensors, the combined weight of the sources required is 68% less than those of the state-of-the-art.
机译:尽管微型燃料电池比锂离子电池和超级电容器存储更多的能量,但是它们消耗的能量更少,这意味着它们无法为多种功能提供动力。但是,它们的功率密集型同行无法维持很长的寿命,这就是为什么混合技术具有吸引力的原因。仍然,微系统很小且反应迅速,因此它们的电源电路也必须小而快速。因此,此处介绍和讨论的双源滞回单电感器0.18 µm互补金属-氧化物-半导体充电器-供电系统从能量密集型源汲取恒定功率,而从可充电功率密集型电池汲取补充功率。原型系统在一个或两个时钟周期内提供并响应1-4 mA的负载突降,并具有73%的峰值效率,并利用来自能量密集型电源的过量功率为电池充电。如果设法通过这种方式从电池中汲取补充功率并装有一个微系统,该系统闲置时的功耗为10μW,峰值峰值为4 mW(与典型的无线传感器一样),则所需电源的总重量要比传统无线传感器的重量少68%。最先进的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号