The article describes the methods of calculation the residual bearing capacity of the operated metal beams taking into account the angular rigidity of the supports. It is shown that under certain types of loads, lowering the angular rigidity of the supports leads to an increase of steel beams load-bearing capacity while the others, on the contrary, to decrease. The example shows the algorithm experimentally-theoretical definition of angular rigidity of the beam supports. Also in the illustrated example increasing the load-bearing capacity of the steel beam in the reducing of angular rigidity.%Рассмотрены методы определения остаточной несущей способности эксплуатируемых металлических балок с учетом угловой жесткости опорных закреплений балок. Показано, что при одних видах нагрузок понижение угловой жесткости опорных закреплений в процессе эксплуатации балки приводит к повышению несущей способности металлических балок, а при других, наоборот, к понижению. На примере показан алгоритм экспериментально-теоретического определения угловой жесткости опорных закреплений балки. Также на примере проиллюстрирован вариант повышения несущей способности балки при снижении угловой жесткости опор.
展开▼