首页> 外文期刊>Atmospheric research >Composition and source apportionment of PM1 at urban site Kanpur in India using PMF coupled with CBPF
【24h】

Composition and source apportionment of PM1 at urban site Kanpur in India using PMF coupled with CBPF

机译:PMF和CBPF结合在印度坎普尔市区PM1中PM1的组成和来源分配

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

This study addresses the three major questions: (1) what are the emission sources of PM1 which are affecting the study area; (2) where do these emission sources come from; and (3) is there any temporal variation in the endssion sources. To address these issues, two advanced statistical methods are described in this paper. Identification of emission sources was performed by EPA PMF (v 5.0) and to understand the temporal variability, sampling was done for three winter seasons 2008-09, 2009-10 and 2011-12 within Kanpur city. To identify the possible source directions, Conditional Bivariate Probability function (CBPF) was used. The average PM1 concentration was higher in 2008-09 followed by 2011-12 and 2009-10 winter seasons. 2008-09 winter showed sources such as secondary sources mixed with power plant emission (42.8%), industrial emission (32.3%), coal combustion, brick kilns and vehicular emission (132%) and residual oil combustion and road dust (11.7%). The major contributors during winter season 2009-10 were secondary sources (33.1%), biomass burning (233%), heavy oil combustion (13%), vehicular emission mixed with crustal dust (11.3%), leather tanning industries (10.3%), industrial emission (4%), coal combustion and brick kilns (3.4%) and solid waste burning and incineration (1.5%) compared to secondary sources mixed with biomass burning (42.3%), industrial emission and crustal dust (35.1%) and vehicular emission and brick kilns (22.6%) during 2011-12 winter season. PMF model revealed that secondary sources were the main contributors for all the three winter seasons followed by biomass burning and power plant emission. The results of CBPF analysis agreed well with the locations of known local point sources., e.g. in the case of industrial emissions, the maximum probability was in the direction between NES direction where almost all the major industries are located in and around Kanpur while in the opposite direction the probability of biomass burning was high due to a rural area in NWS direction. (C) 2016 Elsevier B.V. All rights reserved.
机译:这项研究解决了三个主要问题:(1)什么是影响研究区域的PM1排放源? (2)这些排放源来自哪里; (3)端点来源是否存在任何时间变化。为了解决这些问题,本文介绍了两种高级统计方法。排放源的识别由EPA PMF(v 5.0)进行,并且为了了解时间变化,在坎​​普尔市对三个冬季2008-09、2009-10和2011-12进行了采样。为了确定可能的源方向,使用了条件双变量概率函数(CBPF)。在2008-09年,随后是2011-12年和2009-10年冬季,PM1的平均浓度较高。 2008-09年冬季显示了以下来源,例如与电厂排放物混合的二次排放源(42.8%),工业排放物(32.3%),燃煤,砖窑和车辆排放物(132%)以及残余燃油燃烧和道路扬尘(11.7%) 。在2009-10冬季,主要来源是次要来源(33.1%),生物质燃烧(233%),重油燃烧(13%),混合有地壳尘的车辆排放(11.3%),皮革制革业(10.3%) ,工业排放(4%),燃煤和砖窑(3.4%)以及固体废物燃烧和焚烧(1.5%),而与生物质混合燃烧的次要来源(42.3%),工业排放和地壳粉尘(35.1%)和2011-12冬季的机动车排放和砖窑(22.6%)。 PMF模型显示,在所有三个冬季中,次要来源都是主要的来源,其次是生物质燃烧和发电厂排放。 CBPF分析的结果与已知本地点源的位置非常吻合,例如就工业排放而言,最大的可能性是在几乎所有主要工业都位于坎普尔及其周边的NES方向之间,而在相反的方向,由于西北地区的农村地区,生物质燃烧的可能性很高。 (C)2016 Elsevier B.V.保留所有权利。

著录项

  • 来源
    《Atmospheric research》 |2016年第9期|506-520|共15页
  • 作者单位

    Indian Inst Technol, Dept Civil Engn, Kanpur 208016, Uttar Pradesh, India;

    Indian Inst Technol, Dept Civil Engn, Kanpur 208016, Uttar Pradesh, India;

    Indian Inst Technol, Dept Civil Engn, Kanpur 208016, Uttar Pradesh, India;

    Indian Inst Technol, Dept Civil Engn, Kanpur 208016, Uttar Pradesh, India|Indian Inst Technol, Ctr Environm Sci & Engn, Kanpur 208016, Uttar Pradesh, India;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Source apportionment; PMF; Metals; Ions; PM1; CBPF;

    机译:源分配;PMF;金属;离子;PM1;CBPF;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号