The effect of surface nanocrystallization on plasma nitriding behaviour of AISI 4140 steel

摘要

A plastic deformation surface layer with nanocrystalline grains was produced on AISI 4140 steel by means of surface mechanical attrition treatment (SMAT). Plasma nitriding of SMATand un-SMAT AISI 4140 steel was carried out by a low-frequency pulse excited plasma unit. A series of nitriding experiments has been conducted at temperatures ranging from 380 to 500 ℃ for 8 h in an NH_3 gas. The samples were characterized using X-ray diffraction, scanning electron microscopy, optical microscopy and Vickers microhardness tester. The results showed that a much thicker compound layer with higher hardness was obtained for the SMAT samples when compared with un-SMAT samples after nitriding at the low temperature. In particular, plasma nitriding SMAT AISI 4140 steel at 380℃ for 8 h can produced a compound layer of 2.5μm thickness with very high hardness on the surface, which is similar to un-SMAT samples were plasma nitrided at approximately 430 ℃ within the same time.