Casting mold patterning for lateral capillary force migration on PDMS microchannel

摘要

The casting molds including various shapes within axial and lateral resolution (110 μm and 5 μm) could be precisely fabricated and were suitable for the fabrication of PDMS microchannel possessing the larger inner volume for the purpose of the rapid capillary force migration. The tight bonding between PDMS mold and SiO_/Si surface not only was governed by the flexibility and the degree of tilted angle (TA) of PDMS microchannel which shows the minimum value at the 0.2 weight ratio (W_r) of curing agent but also efficiently generates the capillary migration.