...
首页> 外文期刊>Applied Surface Science >Structure and conformation of poly(ethylene glycol) in confined space of montmorillonite
【24h】

Structure and conformation of poly(ethylene glycol) in confined space of montmorillonite

机译:蒙脱石密闭空间中聚乙二醇的结构与构象

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The structure and conformation of poly(ethylene glycol) (PEG) chains in the confined space of montmorillonite (MMT) were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). A series of PEG/MMT hybrids were synthesized utilizing solution intercalation. Intercalated hybrids with monolayer and double layers of PEG chains were obtained both in Na-MMT and OMMT (DK1). However, the hydrophobic PEG chains cannot intercalate into the interlayer space of OMMT (DK4) due to the strong hydrophilic properties of DK4. There is a saturation ratio when PEG intercalated into the interlayer space of MMT. The deduced saturation ratios of PEG to Na-MMT and DK1 are 0.26 and 0.24, respectively. The structure and conformation of intercalated PEG chains exhibit different characteristics from those of the neat polymer, even more disorder in melting state. According to the results of XRD and FTIR, the structure and conformation of PEG chains in OMMT (DK1) are very similar to Na-MMT. Moreover, a possible model of PEG intercalated MMT is proposed. All PEG chains are intercalated into the interlayer spaces of MMT and form a disorder phase when PEG content is not saturated. In the cases of PEG: MMT=1:10 or 3:10 in weight, the polymer chains form one or two polymer layers. A wider monolayer form when the weight ratio of PEG/MMT is 0.2.
机译:通过X射线衍射(XRD),差示扫描量热法(DSC)和傅里叶变换红外光谱(FTIR)研究了蒙脱石(MMT)密闭空间中聚乙二醇(PEG)链的结构和构象。利用溶液插层法合成了一系列PEG / MMT杂化物。在Na-MMT和OMMT(DK1)中均获得了具有单层和双层PEG链的插层杂种。但是,由于DK4具有很强的亲水性,因此疏水性PEG链无法插入OMMT(DK4)的层间空间。当PEG插入MMT的层间空间时,存在饱和比。推导的PEG与Na-MMT和DK1的饱和比分别为0.26和0.24。插入的PEG链的结构和构象显示出与纯聚合物不同的特征,甚至在熔融状态下表现出更多的无序性。根据XRD和FTIR的结果,OMMT(DK1)中PEG链的结构和构象与Na-MMT非常相似。此外,提出了可能的PEG嵌入MMT模型。当PEG含量不饱和时,所有PEG链均插入MMT的层间空间并形成无序相​​。在PEG:MMT = 1:10或3:10的情况下,聚合物链形成一个或两个聚合物层。当PEG / MMT的重量比为0.2时,较宽的单层形式。

著录项

  • 来源
    《Applied Surface Science》 |2013年第1期|500-506|共7页
  • 作者单位

    State Key laboratory of Polymer Materials Engineering, Chengdu 610065, PR China,Polymer Research Institute of Sichuan University, Chengdu 610065, PR China;

    State Key laboratory of Polymer Materials Engineering, Chengdu 610065, PR China,Polymer Research Institute of Sichuan University, Chengdu 610065, PR China;

    State Key laboratory of Polymer Materials Engineering, Chengdu 610065, PR China,Polymer Research Institute of Sichuan University, Chengdu 610065, PR China;

    State Key laboratory of Polymer Materials Engineering, Chengdu 610065, PR China,Polymer Research Institute of Sichuan University, Chengdu 610065, PR China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    poly(ethylene glycol); montmorillonite; structure; conformation; confined space;

    机译:聚乙二醇);蒙脱石结构体;构象封闭的空间;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号