首页> 外文期刊>Applied Surface Science >Structural characterization of hexadecyltrimethylammonium-smectite composites and their potentiometric electrode applications
【24h】

Structural characterization of hexadecyltrimethylammonium-smectite composites and their potentiometric electrode applications

机译:十六烷基三甲基铵-蒙脱石复合材料的结构表征及其电位电极应用

获取原文
获取原文并翻译 | 示例
           

摘要

Organosmectites were prepared by the intercalation of hexadecyltrimethylammonium cations at various ratios into interlayer of Unye smectite. Structural, thermal, morphological and textural properties of the synthesized organosmectites were characterized. Afterwards, a novel potentiometric PVC-membrane thiocyanate selective electrode was prepared based on the obtained hexadecyltrimethylammonium modified smectites as electroactive material. The basal spacing values of organosmectites were observed in the range of 15.61 and 35.50 A. Powder X-ray diffraction data show that the surfactant cations penetrated into the smectite layers with different molecular arrangements. Modification of smectite with hexadecyltrimethylammonium led to appreciable decreases in the intensities of the FUR bands at 3402 and 1635 cm(-1) and the new characteristic vibrational bands at 2927, 2850, 1472 and 722 cm(-1) originating from the surfactant molecules appeared. The thermal analysis data showed that the decomposition of surfactant species occurred in the temperature range of 170-720 degrees C and the amount of dehydrated water gradually decreased with the increase in surfactant amount. The intercalation of surfactant species within the gallery spacing led gradually to smaller surface areas. In addition, the electrophoretic mobility values indicate that excess surfactant loadings also generate positive charges on the organosmectite surfaces. The most convenient membrane composition resulting in the best potentiometric performance was investigated. The optimum membrane composition was determined to have 20.0% (w/w) 2.5CEC.HDTMA-smectite, 26.0% (w/w) PVC, 54.0% (w/w) DBP The fabricated electrode exhibited a linear response over the thiocyanate concentration range of 1.0 x 10(-4)-1.0 x 10(-1) M (R-2 = 0.9996) with a slope of -48.6 mV/decade. The detection limit, response time and pH working range were determined as 4.3 x 10(-5) M, similar to 10 s and 4-8, respectively. The proposed electrode exhibited selective potentiometric response to thiocyanate comparable to most of the common anions. (C) 2015 Elsevier B.V. All rights reserved.
机译:通过将十六烷基三甲基铵阳离子以不同比例嵌入Unye蒙脱石的夹层中来制备有机蒙脱石。表征了合成有机蒙脱石的结构,热,形貌和结构特性。然后,以所得的十六烷基三甲基铵改性的蒙脱石为电活性材料,制备了新型的电位型PVC膜硫氰酸盐选择性电极。观察到的有机蒙脱石的基础间距值在15.61和35.50 A的范围内。粉末X射线衍射数据表明,表面活性剂阳离子以不同的分子排列渗透到蒙脱石层中。用十六烷基三甲基铵修饰绿土导致FUR谱带在3402和1635 cm(-1)处的强度明显降低,并且出现了2927、2850、1472和722 cm(-1)处的新特征振动谱带,它们来自表面活性剂分子。热分析数据表明,表面活性剂种类的分解发生在170-720℃的温度范围内,并且随着表面活性剂含量的增加,脱水水的量逐渐减少。表面活性剂种类在通道间距内的插入逐渐导致较小的表面积。另外,电泳迁移率值表明过量的表面活性剂负载也在有机蒙脱石表面上产生正电荷。研究了导致最佳电位测量性能的最方便的膜组合物。确定最佳膜组成为20.0%(w / w)2.5CEC.HDTMA蒙脱石,26.0%(w / w)PVC,54.0%(w / w)DBP制成的电极在硫氰酸盐浓度下表现出线性响应范围为1.0 x 10(-4)-1.0 x 10(-1)M(R-2 = 0.9996),斜率为-48.6 mV /十倍。检测极限,响应时间和pH工作范围确定为4.3 x 10(-5)M,分别类似于10 s和4-8。拟议的电极对硫氰酸盐表现出与大多数普通阴离子相当的选择性电位响应。 (C)2015 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号