Effect of microscale texture on cutting performance of WC/Co-based TiAlN coated tools under different lubrication conditions

摘要

Commonly known the severe friction between the tool and chip affects the tool life and the quality of the machined surfaces. Introducing a lubricant into the tool-chip interface can be used to alleviate the friction, the effectiveness of which may be improved by surface texturing of the tools. Thus, surface textures were fabricated using laser on the rake of the cemented carbide (WC/Co) inserts, then TiAlN films were coated on the textured tools. The effect of the textures on the cutting performance was investigated using the textured coated tools and conventional coated tools in cutting AISI 1045 hardened steel tests. Two batches of cutting tests were carried out, in regimes of full and starved lubrication. The machining performance was assessed in terms of the cutting forces, friction coefficient at the tool-chip interface, surface roughness of machined workpiece and tool wear on the rake face. Results show that the cutting performance of textured tools was enhanced, especially under the full lubrication condition.