Analysis of the low-pressure plasma pretreated polymer surface in terms of acid-base approach

摘要

We demonstrate the use of a modern wetting method for determining the acid-base properties of treated polymer surfaces for different plastics and adhesives. The effect of the surface treatment with low pressure plasma was evaluated from the viewpoint of acid-base approach with plastics polyoxymethylene (POM) and polyetheretherketone (PEEK). The correlations between the acid-base properties and the identified mechanical tensile strengths of adhesive bonded joints were evaluated and discussed. In the investigated range the determination coefficients for POM and PEEK were calculated to R-2 = 0.93 and R-2 = 0.97, respectively. These relatively high determination coefficients showed a good correlation between the mechanical strength and the acidity parameter Delta D-short for use in bonding technology for surface pretreatment of polymers with LPP. (C) 2016 Elsevier B.V. All rights reserved.