首页> 外文期刊>Applied Surface Science >Polycrystalline La1-xSrxMnO3 films on silicon: Influence of post-Deposition annealing on structural, (Magneto-) Optical, and (Magneto-) Electrical properties
【24h】

Polycrystalline La1-xSrxMnO3 films on silicon: Influence of post-Deposition annealing on structural, (Magneto-) Optical, and (Magneto-) Electrical properties

机译:硅上的多晶La1-xSrxMnO3薄膜:沉积后退火对结构,(磁)光学和(磁)电性能的影响

获取原文
获取原文并翻译 | 示例
       

摘要

The integration of La1-xSrxMnO3 (LSMO) thin film technology into established industrial silicon processes is regarded as challenging due to lattice mismatch, thermal expansion, and chemical reactions at the interface of LSMO and silicon. In this work, we investigated the physical properties of thin La0.73Sr0.27MnO3 films deposited by magnetron sputtering on silicon without a lattice matching buffer layer. The influence of a post-deposition annealing treatment on the structural, (magneto-) optical, and (magneto-) electrical properties was investigated by a variety of techniques. Using Rutherford backscattering spectroscopy, atomic force microscopy, Raman spectroscopy, and X-ray diffraction we could show that the thin films exhibit a polycrystalline, rhombohedral structure after a post-deposition annealing of at least 700 degrees C. The dielectric tensor in the spectral range from 1.7 eV to 5 eV determined from spectroscopic ellipsometry in combination with magneto-optical Kerr effect spectroscopy was found to be comparable to that of lattice matched films on single crystal substrates reported in literature [1]. The values of the metal-isolator transition temperature and temperature-dependent resistivities also reflect a high degree of crystalline quality of the thermally treated films. (C) 2017 Elsevier B.V. All rights reserved.
机译:由于晶格失配,热膨胀以及LSMO和硅之间的化学反应,将La1-xSrxMnO3(LSMO)薄膜技术集成到已建立的工业硅工艺中被认为具有挑战性。在这项工作中,我们研究了在没有晶格匹配缓冲层的情况下通过磁控溅射沉积在硅上的La0.73Sr0.27MnO3薄膜的物理性能。通过多种技术研究了沉积后退火处理对结构,(磁)光学和(磁)电性能的影响。使用卢瑟福背散射光谱,原子力显微镜,拉曼光谱和X射线衍射,我们可以证明薄膜在至少700摄氏度的沉积后退火后表现出多晶的菱面体结构。介电张量在光谱范围内由椭圆偏振光谱法和磁光克尔效应光谱法测定的1.7 eV至5 eV与文献报道的单晶衬底上的晶格匹配膜相当[1]。金属-绝缘体转变温度和与温度相关的电阻率的值也反映了热处理膜的高度结晶质量。 (C)2017 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号