首页> 外文期刊>Applied clay science >Predicting the normalized, undrained shear strength of saturated fine-grained soils using plasticity-value correlations
【24h】

Predicting the normalized, undrained shear strength of saturated fine-grained soils using plasticity-value correlations

机译:使用可塑性值相关性预测饱和细粒土的归一化不排水抗剪强度

获取原文
获取原文并翻译 | 示例
       

摘要

In soil mechanics, the plasticity of fine-grained soils is expressed using the plasticity index. This represents the difference between the water content at the liquid and plastic limits, which are often collectively referred to as the Atterberg (or consistency) limits. They are of key importance in soil mechanics because they determine, in a simple way, the interaction between the solid and liquid phases in soils, and thus provide the possibility to classify soils into groups with similar mechanical properties. As the Atterberg limits are the most distinctive and the easiest property of fine-grained soils to measure, several researchers have tried to use them to predict various mechanical properties, such as the normalized, undrained shear strength of finegrained soils. The most widely used expression for predicting this value from the plasticity index was suggested by Skempton. Since then, there have been several studies to examine the validity of his relation. A lot of the data agree with this relation; however, there is an equally large volume of data that contradicts it. The present study shows that the correlation between the normalized undrained shear strength of cohesive soils and the plasticity index really exists, but it is not as simple as was suggested by previous studies. By considering the mineralogical properties of clay minerals and their impact on the quantity and state of water in soils, it was found that there is no uniform criterion to determine the normalized undrained shear strength from the plasticity index for all fine-grained soils.
机译:在土壤力学中,细粒土壤的可塑性用可塑性指数表示。这代表了液体和塑料极限下的水分含量之间的差异,通常将它们统称为Atterberg(或稠度)极限。它们在土壤力学中至关重要,因为它们以一种简单的方式确定了土壤中固相和液相之间的相互作用,因此提供了将土壤分类为具有相似机械特性的组的可能性。由于Atterberg极限是细粒土壤最独特,最容易测量的特性,因此,许多研究人员试图使用它们来预测各种机械性能,例如细粒土壤的归一化,不排水剪切强度。 Skempton提出了根据可塑性指数预测该值的最广泛使用的表达式。从那时起,已经有几项研究来检验他的关系的有效性。许多数据都同意这种关系。但是,与此相反,同样有大量数据。目前的研究表明,黏性土的归一化不排水抗剪强度与可塑性指标之间的关系确实存在,但并不像以前的研究那样简单。通过考虑粘土矿物的矿物学特性及其对土壤中水的含量和状态的影响,发现没有统一的标准可从所有细粒土壤的塑性指数中确定归一化不排水剪切强度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号