首页> 外文期刊>Applied clay science >Preparation and investigation of hydrophilic, photocatalytic, and antibacterial polyacrylic latex coating containing nanostructured TiO2/Ag+-exchanged-montmorillonite composite material
【24h】

Preparation and investigation of hydrophilic, photocatalytic, and antibacterial polyacrylic latex coating containing nanostructured TiO2/Ag+-exchanged-montmorillonite composite material

机译:纳米结构TiO2 / Ag +交换蒙脱土复合材料的亲水,光催化抗菌聚丙烯酸酯乳胶涂料的制备与研究

获取原文
获取原文并翻译 | 示例
           

摘要

In order to prepare a self cleaning and antibacterial coating, nanostructured TiO2/Ag+-exchanged-montmorillonite composite material was prepared and used as additive in a commercial grade polyacrylic latex coating. FT-IR and UV-visible spectroscopy, X-ray diffraction patterns and FESEM were used to characterize the composition and structure of the nanocomposites and coatings. The polyacrylic coatings, prepared by the using of TiO2/Ag+-exchanged-montmorillonite additive, showed better DV and visible light absorption, hydrophilic property, photodegradation of organic pollutants, stability in water and antibacterial properties than pristine commercial grade polyacrylic latex coating. According to the results, the modified polyacrylic coating containing 3% w of nanostructured TiO2/Ag+-exchanged-montmorillonite composite material as additive, with TiO2 to Ag+-exchanged-montmorillonite ratio of 2:1, was the best coating considering most of the useful properties such as low water contact angle, high photodegradation efficiency, and high water resistivity. The water contact angle for unmodified polyacrylic latex coating was 68 while it was decreased to about 10 or less for modified coating after 24 h LED lamp illumination. (C) 2016 Elsevier B.V. All rights reserved.
机译:为了制备自清洁和抗菌涂层,制备了纳米结构的TiO2 / Ag +交换蒙脱土复合材料,并将其用作工业级聚丙烯胶乳涂料的添加剂。 FT-IR和UV-可见光谱,X射线衍射图和FESEM被用来表征纳米复合材料和涂层的组成和结构。通过使用TiO2 / Ag +交换蒙脱土添加剂制备的聚丙烯酸酯涂料,与原始的商品级聚丙烯酸酯乳胶涂料相比,具有更好的DV和可见光吸收性,亲水性,有机污染物的光降解性,水稳定性和抗菌性。根据结果​​,改性聚丙烯酸酯涂层包含3%w的纳米结构TiO2 / Ag +交换蒙脱土复合材料作为添加剂,并且TiO2与Ag +交换蒙脱土的比例为2:1,是考虑到大多数有用材料的最佳涂层。低的水接触角,高的光降解效率和高的水电阻率等特性。未改性的聚丙烯丙烯酸胶乳涂料的水接触角为68,而在24小时LED灯照射后,其接触角降低至约10或更小。 (C)2016 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号