首页> 外文期刊>Annals of nuclear energy >Comparative study of unprotected loss of flow accident analysis of 1000 MWe and 500 MWe Fast Breeder Reactor Metal (FBR-M) cores and their inherent safety
【24h】

Comparative study of unprotected loss of flow accident analysis of 1000 MWe and 500 MWe Fast Breeder Reactor Metal (FBR-M) cores and their inherent safety

机译:1000 MWe和500 MWe快速增殖反应堆金属(FBR-M)堆芯无保护性流失事故分析的比较研究及其固有安全性

获取原文
获取原文并翻译 | 示例
           

摘要

Unprotected loss of How (ULOF) analysis of metal (U-Pu-6% Zr) fuelled 500 MWe and 1000 MWe pool type FBR are studied to verify the passive shutdown capability and its inherent safety parameters. Study is also made with uncertainties (typically 20%) on the sensitive feedback parameters such as core radial expansion feedback and sodium void reactivity effect. Inference of the study is, nominal transient behavior of both 500 MWe and 1000 MWe core are benign under unprotected loss of flow accident (ULOFA) and the transient power reduces to natural circulation based Safety Grade Decay Heat Removal (SGDHR) system capacity before the initiation of boiling. Sensitivity analysis of 500 MWe shows that the reactor goes to sub-critical and the transient power reduces to SGDHR system capacity before the boiling initiation. In the sensitivity analysis of 1000 MWe core, initiation of voiding and fuel melting occurs. But, with 80% core radial expansion reactivity feedback and nominal sodium expansion reactivity feedback, the reactor was maintained substantially sub-critical even beyond when net power crosses the SGDHR system capacity. From the study, it is concluded that if the sodium void reactivity is limited (4.6 $) then the inherent safety of 1000 MWe design is assured, even with 20% uncertainty on the sensitive parameters. 【keyworks】Unprotected loss of flow;Inherent safety;Metal core;Decay heat;Sensitivity analysis;Reactivity feedback
机译:研究了对500 MWe和1000 MWe池式FBR供油的金属(U-Pu-6%Zr)的无保护损失How(ULOF)分析,以验证被动关机能力及其固有的安全参数。还对敏感反馈参数(例如核心径向膨胀反馈和钠空反应性效应)进行了不确定性研究(通常为20%)。该研究的推论是,在无保护的流量损失事故(ULOFA)下,500 MWe和1000 MWe磁芯的标称瞬态行为都是良性的,并且瞬态功率在启动前会降低至基于自然循环的安全等级衰变散热(SGDHR)系统容量沸腾的500 MWe的灵敏度分析表明,反应器达到亚临界状态,并且在沸腾开始之前,瞬态功率降低至SGDHR系统容量。在对1000 MWe磁芯进行灵敏度分析时,会出现空隙和燃料熔化的现象。但是,有了80%的堆芯径向膨胀反应性反馈和标称钠膨胀反应性反馈,即使净功率超过SGDHR系统容量,反应堆也基本上保持亚临界状态。从研究中得出的结论是,如果钠空隙反应性受到限制(4.6 $),则即使在敏感参数具有20%不确定性的情况下,也可以确保1000 MWe设计的固有安全性。 【主要工作】无保护的流量损失;本质安全;金属芯;衰减热;灵敏度分析;反应性反馈

著录项

  • 来源
    《Annals of nuclear energy》 |2011年第5期|p.1065-1073|共9页
  • 作者单位

    Indira Candhi Centre for Atomic Research, Kalpakkam 603 102, Kanchipuram District, Tamil Nadu, India;

    Indira Candhi Centre for Atomic Research, Kalpakkam 603 102, Kanchipuram District, Tamil Nadu, India;

    Indira Candhi Centre for Atomic Research, Kalpakkam 603 102, Kanchipuram District, Tamil Nadu, India;

    Indira Candhi Centre for Atomic Research, Kalpakkam 603 102, Kanchipuram District, Tamil Nadu, India;

    Indira Candhi Centre for Atomic Research, Kalpakkam 603 102, Kanchipuram District, Tamil Nadu, India;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号