...
首页> 外文期刊>IEEE Transactions on Aerospace and Electronic Systems >Multiview Three-Dimensional Interferometric Inverse Synthetic Aperture Radar
【24h】

Multiview Three-Dimensional Interferometric Inverse Synthetic Aperture Radar

机译:多视图三维干涉逆合成孔径雷达

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Three-dimensional (3D) inverse synthetic aperture radar (ISAR) imaging has been proven feasible by combining traditional ISAR imaging and interferometry. Such technique, namely Inteferometric ISAR (InISAR), allows for the main target scattering centers to be mapped into a 3-D spatial domain, therefore forming 3-D images under the form of 3-D point clouds. 3-D InISAR overcomes some main limitations of traditional 2-D ISAR imaging, such as the problem of cross-range scaling and unknown image projection plane. Despite the great advantage of 3-D imaging over traditional 2-D imaging, some issues remain, such as scatterer scintillation, shadowing effects, poor SNR, etc., which limit the effectiveness of 3-D imaging. A solution to these issues can be found in the use of multiple 3-D views, which can be obtained exploiting either multitemporal or multiperspective configurations or a combination of both. This paper proposes this concept and develops the image fusion algorithms that are necessary to produce multiview 3-D ISAR images. The effectiveness of the proposed technique is tested by using real data collected with a multistatic InISAR system.
机译:通过组合传统的ISAR成像和干涉测量,已经证明了三维(3D)逆合成孔径雷达(ISAR)成像。这种技术,即信息化ISAR(INISAR),允许将主要目标散射中心映射到3-D空间域中,因此以3-D点云的形式形成3-D图像。 3-D INISAR克服了传统的2-D ISAR成像的一些主要局限,例如交叉范围缩放和未知图像投影平面的问题。尽管在传统的2-D成像上的3-D成像的优势很大,但一些问题仍然存在,例如散射体闪烁,阴影效果,差,SNR等,这限制了3-D成像的有效性。可以在使用多个三维视图中找到对这些问题的解决方案,可以利用多模车或多次配置配置或两者的组合来获得。本文提出了这一概念,并开发了生产多视图3-D ISAR图像所必需的图像融合算法。通过使用具有多态INISAR系统收集的真实数据来测试所提出的技术的有效性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号