Analysis of a Serial/Parallel Type of Electromagnetic Actuator

摘要

This paper describes the design and analysis of a small-sized and high thrust electromagnetic actuator. The proposed actuator is supposed to be used for application control of the hotmelt adhesive. The hotmelt has different characteristics for each material and the electromagnetic actuator is required variable characteristics. However, the problem seems to lie in the fact that it is necessary to remake another mold again to change the characteristics of the conventional electromagnetic actuator. Therefore, this paper presents small-sized electromagnetic actuator called a basic model that can stack it in the axial direction or in the radial direction. As the analysis comparison at the same size, the characteristics of conventional two serial model which stack two basic models in the axial direction and proposed three serial models have been compared by three-dimensional finite element method. In the proposed model, characteristics have been improved by reducing the core volume and increasing the number of stacks in the basic model from the viewpoint of magnetic flux density. In addition, various electromagnetic actuators that stack basic models in the axial direction or in the radial direction have been analyzed. The analysis results have been clearly shown as characteristics mapping and it has indicated that the proposed electromagnetic actuator can be constructed easily by stacking the basic model.