首页> 美国卫生研究院文献>other >The immobilization of a direct thrombin inhibitor to a polyurethane as a nonthrombogenic surface coating for extracorporeal circulation
【2h】

The immobilization of a direct thrombin inhibitor to a polyurethane as a nonthrombogenic surface coating for extracorporeal circulation

机译:将直接凝血酶抑制剂固定在聚氨酯上作为无血栓形成的表面涂层用于体外循环

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A biomaterial with both antithrombin and antiplatelet properties is the ideal surface for use in extracorporeal circulation (ECC) as it targets both fibrin generation and platelet adhesion. A hemocompatible surface coating avoids the need for systemic anticoagulation by providing a local anticoagulant effect at the polymer-blood interface. Previous work has demonstrated the potential use of argatroban, a direct thrombin inhibitor, as a nonthrombogenic material for extracorporeal devices. The work reported here focuses on the characterization of argatroban linked to a polyurethane-silicone polymer, CarboSil®. Chemical immobilization, the amount of argatroban, incubation times, and saturation point were evaluated to achieve maximal antithrombin activity at the polymer surface. Cross-linked polymer coatings reacted with 10 and 30 µmole of argatroban were prepared and tested. These coatings resulted in argatroban activity levels of 0.131 µM and 0.446 µM, respectively. After refining the cross-linking process, argatroban activity increased by approximately 3.6 fold. Maintenance of activity and leaching from the polymer surface were also evaluated. Using the refined process for linking argatroban to polymer, the resulting polymer was applied as a surface coating to the inner lumen of poly(vinyl chloride) ECC circuit tubing and its antithrombin effect evaluated using a 4 h rabbit ECC model. Following 4 h of blood exposure, the argatroban circuit demonstrated significantly less thrombus formation compared to the control CarboSil® coating with a 4.1 cm2 thrombus average area for the control coating compared to 1.2 cm2 for the argatroban coating (n=4). There was no significant change in thrombin time from baseline in plasma from animals in which the argatroban coated circuit was used, with a thrombin time of 16.2 s at t=0 and 14.5 s after 4 h. These results demonstrate the potential efficacy of immobilized argatroban as a hemocompatible biomaterial for extracorporeal life support devices.
机译:具有抗凝血酶和抗血小板特性的生物材料是用于体外循环(ECC)的理想表面,因为它既针对纤维蛋白生成又针对血小板粘附。血液相容性表面涂层通过在聚合物-血液界面处提供局部抗凝作用而避免了全身抗凝的需要。先前的工作证明了直接凝血酶抑制剂argatroban可能用作体外器械的非血栓形成材料。此处报道的工作重点在于与聚氨酯-硅氧烷聚合物CarboSil®相连的argatroban的表征。评价化学固定化,阿加曲班的量,孵育时间和饱和点,以在聚合物表面获得最大的抗凝血酶活性。制备并测试了与10和30μmolArgatroban反应的交联聚合物涂层。这些涂层产生的阿加曲班活性水平分别为0.131 µM和0.446 µM。完善了交联过程后,阿加曲班活性提高了约3.6倍。还评估了活性的维持和从聚合物表面的浸出。使用将Argatroban与聚合物连接的精制工艺,将所得聚合物作为表面涂层涂覆到聚氯乙烯ECC电路管的内腔中,并使用4 h兔ECC模型评估其抗凝血酶作用。血液暴露4小时后,与对照CarboSil®涂层相比,argatroban回路的血栓形成明显减少,对照涂层的血栓平均面积为4.1 cm 2 ,而对照涂层为1.2 cm 2 < / sup>用于argatroban涂层(n = 4)。使用argatroban包被电路的动物血浆中的凝血酶时间与基线相比没有明显变化,凝血酶时间在t = 0时为16.2 s,在4 h后为14.5 s。这些结果证明了固定化阿加曲班作为体外生命维持设备的血液相容性生物材料的潜在功效。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号