首页> 美国卫生研究院文献>Nanoscale Research Letters >A Novel Self-aligned and Maskless Process for Formation of Highly Uniform Arrays of Nanoholes and Nanopillars
【2h】

A Novel Self-aligned and Maskless Process for Formation of Highly Uniform Arrays of Nanoholes and Nanopillars

机译:一种新型的自对准和无掩模工艺用于形成高度均匀的纳米孔和纳米柱阵列。

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Fabrication of a large area of periodic structures with deep sub-wavelength features is required in many applications such as solar cells, photonic crystals, and artificial kidneys. We present a low-cost and high-throughput process for realization of 2D arrays of deep sub-wavelength features using a self-assembled monolayer of hexagonally close packed (HCP) silica and polystyrene microspheres. This method utilizes the microspheres as super-lenses to fabricate nanohole and pillar arrays over large areas on conventional positive and negative photoresist, and with a high aspect ratio. The period and diameter of the holes and pillars formed with this technique can be controlled precisely and independently. We demonstrate that the method can produce HCP arrays of hole of sub-250 nm size using a conventional photolithography system with a broadband UV source centered at 400 nm. We also present our 3D FDTD modeling, which shows a good agreement with the experimental results.
机译:在许多应用中,例如太阳能电池,光子晶体和人造肾脏,需要制造具有深亚波长特征的大面积周期性结构。我们提出了一种低成本和高通量的过程,该过程使用六方密堆积(HCP)二氧化硅和聚苯乙烯微球的自组装单层实现深亚波长特征的2D阵列。这种方法利用微球作为超透镜,在传统的正负光刻胶上以高纵横比在大面积上制造纳米孔和柱阵列。可以精确且独立地控制用此技术形成的孔和柱的周期和直径。我们证明该方法可以使用传统的光刻系统以400 nm为中心的宽带UV源来产生小于250 nm尺寸的HCP孔阵列。我们还介绍了我们的3D FDTD建模,与实验结果显示出很好的一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号