首页> 美国卫生研究院文献>Scientific Reports >Giant reversible elongation upon cooling and contraction upon heating for a crosslinked cis poly(14-butadiene) system at temperatures below zero Celsius
【2h】

Giant reversible elongation upon cooling and contraction upon heating for a crosslinked cis poly(14-butadiene) system at temperatures below zero Celsius

机译:在低于零摄氏度的温度下交联的顺式聚(14-丁二烯)系统在冷却时具有巨大的可逆伸长率在加热时则具有收缩特性

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Polymers with reversible elongation upon cooling (EUC) and contraction upon heating (CUH) enabled applications in actuators, fasteners, dampers, grippers, swimmers, sealants, etc. With the current working temperature being limited to mainly above zero Celsius, applications for subzero Celsius environments are obstructed. In addition, current reversible actuation needs a constant tensile load, or for the best case, under zero tensile load. Reversible EUC and CUH under compressive load is almost impossible and has not been explored. In this work, a cis poly(1,4-butadiene) based system has been developed. Actuated below zero Celsius, 69% EUC occurred under a tensile load; and 6.2% EUC and 17.9% CUH occurred under 0.05 MPa compressive load. The reversible actuation was driven by both entropy and enthalpy, which was validated by a series of characterization tools.
机译:具有可逆冷却伸长率(EUC)和加热收缩率(CUH)的聚合物可用于执行器,紧固件,减震器,夹持器,游轮,密封剂等。当前的工作温度主要限制在零摄氏度以上,零摄氏度以下的应用环境受阻。另外,当前的可逆致动需要恒定的拉伸负载,或者最好是在零拉伸负载下。在压缩载荷下可逆的EUC和CUH几乎是不可能的,尚未进行探索。在这项工作中,已开发出一种基于顺式聚(1,4-丁二烯)的系统。在低于零摄氏度的条件下,在拉伸载荷下发生了69%的EUC。在0.05 MPa的压缩载荷下发生了6.2%的EUC和17.9%的CUH。熵和焓都驱动可逆驱动,这已通过一系列表征工具得到验证。

著录项

  • 期刊名称 Scientific Reports
  • 作者

    Lu Lu; Jinbao Cao; Guoqiang Li;

  • 作者单位
  • 年(卷),期 -1(8),-1
  • 年度 -1
  • 页码 14233
  • 总页数 9
  • 原文格式 PDF
  • 正文语种
  • 中图分类
  • 关键词

  • 入库时间 2022-08-21 10:57:53

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号