首页> 中文期刊>人民黄河 >装配式U形混凝土渠道衬砌钢模具数值模拟

装配式U形混凝土渠道衬砌钢模具数值模拟

     

摘要

In order to explore the law of stress-strain for the U-shaped steel mold prefabricated concrete channel, numerical simulation was carried out under different thickness,longitudinal stiffener and transverse stiffeners with D60 U-shaped steel mold as research object by ADI-NA software that used for different thickness,different longitudinal stiffener numerical simulation of different ribs and transverse stiffeners of steel mold.The results indicate that the displacement of the steel mold on the straight linear segments is the maximum,the arc segments come second and the straight line connecting segments and arc segments connecting segment are the minimum. Stress in a straight line connecting segment and arcs connecting segment of steel model are the maximum,the straight linear segment and arc segments are lesser and the degree of influence of the thickness of the steel mold is larger than the number of longitudinal stiffener and the degree of influence of the number of longitudinal stiffener is larger than the number of transverse stiffener of steel model. Within the allowable deformation range,the appropriate thickness of the prefabricated concrete lining steel mold channel is 8 mm-10 mm and the appropriate number of longitudinal stiffeners is 3 to 4 and the appropriate number of transverse stiffeners is 2(1 transverse stiffener for each straight linear segment and arc segment).%为了探求装配式U形混凝土衬砌渠道钢模具在预制混凝土衬砌板时的应力应变规律,以D60装配式U形混凝土渠道衬砌钢模具为研究对象,运用ADINA软件对不同厚度、不同纵向加劲肋及不同横向加劲肋的钢模具进行数值模拟.结果表明:钢模具的变形在直线段最大,弧线段次之,直线连接段和弧线连接段最小;等效应力在直线连接段和弧线连接段最大,直线段和弧线段较小,并且钢模具厚度的影响程度>纵向加劲肋数量的影响程度>横向加劲肋数量的影响程度;在一定的变形允许范围之内,装配式U形混凝土衬砌渠道钢模具的厚度以8~10 mm为宜,纵向加劲肋以3~4根为宜,横向加劲肋以2根为宜(布置在直线段和弧线段各1根).

著录项

  • 来源
    《人民黄河》|2018年第3期|143-148|共6页
  • 作者单位

    宁夏大学 土木与水利工程学院,宁夏 银川750021;

    宁夏大学 土木与水利工程学院,宁夏 银川750021;

    宁夏节水灌溉与水资源调控工程技术研究中心,宁夏 银川750021;

    教育部旱区现代农业水资源高效利用工程研究中心,宁夏 银川750021;

    宁夏大学 土木与水利工程学院,宁夏 银川750021;

    宁夏节水灌溉与水资源调控工程技术研究中心,宁夏 银川750021;

    教育部旱区现代农业水资源高效利用工程研究中心,宁夏 银川750021;

    宁夏大学 土木与水利工程学院,宁夏 银川750021;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 水工混凝土;
  • 关键词

    U形混凝土衬砌渠道; 钢模具; 数值模拟; 应力应变; ADINA;

  • 入库时间 2023-07-24 22:19:02

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号