基于UG的一模多腔注射模设计

摘要

Knob produced in bulk for a small product was used by the layout of 6 chambers in cavity. Single cavity mold was designed in first with UG, then according to the cavity layout design, multi cavity mold was completed by copy and mirror command.%旋钮为一小型产品，大批量生产，故可采用一模6腔平衡式的型腔布局。在利用UG进行模具设计时，先设计单腔模，然后根据型腔布局，利用复制镜像及求和命令完成一多腔模的设计。