首页> 中文期刊> 《机械工程材料》 >用硅灰低温制备莫来石晶须

用硅灰低温制备莫来石晶须

         

摘要

以硅灰和硫酸铝为原料,以硫酸钠为反应介质用反应烧结法制备了莫来石晶须,研究了烧结温度和时间对其物相的影响。结果表明:制备莫来石晶须的最佳烧结温度为900℃时,烧结时间为1~2h;当烧结时间为3h或烧结温度高于900℃时,有氧化铝和硅铝酸钠生成;在900℃烧结2h制备出直径为0.03~0.6μm、最大长度大于6μm的莫来石晶须。%Taking silica fume and aluminum sulfate as raw materials,sodium sulfate as reaction medium,mullite whiskers were prepared by reaction sintering technology.The effects of sintering temperature and time on the phase of products were studied.The results show that the optimum sintering temperature and time of mullite whisker growth were 900 ℃ and 1-2 h,respectively.Alumina and sodium aluminium silicate generated when sintering time was 3 h or sintering temperature was over 900 ℃.The mullite whiskers with diameter of 0.03-0.6 μm and with maximum length over 6 μm was obtained after sintering at 900 ℃ for 2 h.

著录项

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号