模具半导体激光强韧化工艺研究

摘要

为了研究模具材料半导体激光表面强韧化工艺,采用半导体激光表面淬火工艺,进行了7CrSiMnMoV,Cr12MoV,CrMo铸铁等典型模具材料半导体激光淬火的工艺研究,得到了不同模具材料优化的激光工艺参量.结果表明,激光表面淬火后的硬度满足模具材料的使用要求.这一结果为激光模具表面强韧化处理提供了可靠的保障.%In outer to improve the surface hardness and toughness of dies, several typical die materials, such as 7CrSiHnMoV, Crl2MoV, CrMo cast iron, were hardened with a high power diode laser and the optimal laser parameters were obtained. Results show that the optimal laser parameters can meet the requirement of the hardness of dies and provide a guarantee to the hardness and toughness of dies in future application.