首页> 外文期刊>系统工程与电子技术(英文版) >Adaptive sliding mode backstepping control for near space vehicles considering engine faults
【24h】

Adaptive sliding mode backstepping control for near space vehicles considering engine faults

机译:考虑发动机故障的近空间飞行器自适应滑模反推控制

获取原文
获取原文并翻译 | 示例
       

摘要

A fault tolerant control methodology based adaptive sliding mode (ASM) backstepping is proposed for near space vehicle (NSV) attitude control system under engine faults. The proposed scheme combined adaptive backstepping with the slid-ing mode control strategy could guarantee the system's stability and track desired signals under external disturbances and en-gine faults.Firstly,attitude mode description and the engine faulty model are given. Secondly, a nominal control law is designed. Thirdly,a sliding mode observer is given later in order to estimate both the information of engine faults and external disturbances.An adaptive sliding mode technology based on the previous nominal control law is developed via updating faulty parameters. Finally, analyze the system's fault-tolerant performance and reliability through experiment simulation, which verifies the proposed de-sign of fault-tolerant control can tolerate engine faults, as well as the strong robustness for external disturbance.
机译:针对发动机故障下的近太空飞行器(NSV)姿态控制系统,提出了一种基于容错控制方法的自适应滑模(ASM)反推。所提出的方案将自适应反推与滑模控制策略相结合,可以保证系统的稳定性,并能在外界干扰和发动机故障的情况下跟踪期望的信号。首先,给出了姿态模式描述和发动机故障模型。其次,设计了名义控制律。第三,稍后给出滑模观测器,以估计发动机故障和外部干扰的信息。通过更新故障参数,开发了一种基于先前标称控制律的自适应滑模技术。最后,通过实验仿真分析了系统的容错性能和可靠性,验证了所提出的容错控制设计能够容忍发动机故障以及对外部干扰的强大鲁棒性。

著录项

  • 来源
    《系统工程与电子技术(英文版)》 |2018年第2期|343-351|共9页
  • 作者单位

    College of Automation Engineering,Nanjing University of Posts and Telecommunications,Nanjing 210023,China;

    Jiangsu Province 3D Printing Equipment and Manufacturing Key Lab,Nanjing 210042,China;

    Jiangsu Engineering Laboratory for Internet of Things and Intelligent Robots,Nanjing 210023,China;

    College of Automation Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;

    School of Electrical and Automation Engineering,Nanjing Normal University,Nanjing 210046,China;

    Jiangsu Province 3D Printing Equipment and Manufacturing Key Lab,Nanjing 210042,China;

    College of Automation Engineering,Nanjing University of Posts and Telecommunications,Nanjing 210023,China;

    Shanghai Institute of Satellite Engineering,Shanghai 200240,China;

  • 收录信息 中国科学引文数据库(CSCD);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-19 04:25:41
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号