首页> 中文期刊> 《功能材料》 >时效工艺对Cu-Te-Cr合金性能的影响

时效工艺对Cu-Te-Cr合金性能的影响

         

摘要

Effect of aging time on the mechanical and electrical properties of Cu-Te-Cr alloys was studied at dif-ferent temperature. SEM and EDS were used to analyze the morphologies and composition of precipitations. The results showed that with the aging time being longer, both hardness and conductivity of the alloys increase rap-idly originally, and then decrease, reaching a peak at a certain time which reduces when the aging temperature in-crease. With more content of Te adding, the hardness of Cu-Te-Cr alloy drops, while its conductivity rises rela-tively. This is because grain growth and precipitations happened simultaneously during aging process. But part precipitations dissolved when aging continued, thus leading to decrease of hardness and conductivity.%研究了在不同时效温度下,时效时间对Cu-Te-Cr合金力学性能和电学性能的影响.利用扫描电镜和能谱仪分析了析出相的形貌、组成及其分布.研究表明,随着时效时间的延长,合金硬度和导电率都先快速上升,然后缓慢下降,出现一个类似峰值点.且温度越高,达到峰值所需的时间越短;随着Te含量的增加,合金硬度减小,而导电率则相对提高.这是由于随时效时间的延长和时效温度的提高,合金发生晶粒长大和第二相析出、从而提高合金硬度和导电率;随时效的进一步进行,部分第二相发生重溶,晶粒进一步长大,合金硬度和导电率缓慢下降.

著录项

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号