The atomically economic and green chemical reaction of direct amination of isobutylene to tertbutylamine, particularly under the relative mild reaction conditions available for future industrial use,was carried out over zeolite catalysts possessing different topological structures, from one dimensional to three dimensional pore system, and from small 8-member ring pore（MRP） to medium 10 MRP and further to large 12 MRP zeolites, to disclose the relationship between the zeolite properties/topologies and their amination performance systematically under the mild reaction conditions. It was discovered that the pore structure and the acidities of zeolite catalysts played crucial roles in the isobutylene amination process, and suitable pore diameter（larger than 0.5 nm or with large side pockets/cups in the outside surface） and a certain number of mid-strong acid sites are indispensable to catalyze the amination reaction,while too strong acid strength was not conducive to the process of isobutylene amination. Among them,zeolites with topologies of BEA, MFI, MEL, MWW and EUO exhibited good amination performance, with which the isobutylene conversion was higher than 12.61%（>46.42% of the equilibrium conversion） under the studied mild reaction conditions. Due to the good amination performance and the large adjustable Si/Al2 ratio range, ZSM-5 was selected to further study the effect of acidity on the amination performance systematically under the mild reaction conditions, and the activity-acidity relationship in the amination process was disclosed: the amination activity（isobutylene conversion） had a linear correlation with the amount of mid-strong B acidity under the studied conditions over ZSM-5 catalyst, which can provide guidance for further developing high-efficient amination catalyst under mild reaction conditions available for future industrial use.
展开▼
