间断供能的引信装定数据双向传输方法

摘要

现有的感应装定引信电路在装定信息反向传输过程中能量利用率低，因此大容量数据在传输过程中引信没有足够的能量接收数据。针对此问题，提出间断供能的引信装定数据双向传输方法。该方法中装定器对引信间断供电，在数据下传完成后，装定器依据数据多少字节停顿1 ms左右，在这期间内引信将数据上传回去，由装定器检测判断反向传输数据是否正确，从而判断装定正确与否。试验表明，该方法能可靠的实现装定数据反向传输，并有效提高装定信息反向传输阶段的能量利用率，使大容量数据能可靠的传输。%The existing fuze circuit for inductive setting is of low efficiency of energy using in reverse informa-tion transporting,therefore,large volumes of data dose not have enough energy in the process of data transpor-ting.To solve that problem,a intermittent energy supplying method of setting data for fuze is proposed.The fuze setter supplied electricity for fuze intermittently.When the downloading of data finished,fuze setter paused about 1 ms according to the amount of byte.During this period,fuze uploaded the data back and the setter would j udge whether the reverse transporting was correct,then to decide whether the fuze was correctly set. Experiment showed that,this method could achieve reverse data transporting of setting data reliably,and im-proved the using efficiency of energy,which made large volume of data transporting safely.