首页> 外文期刊>中南大学学报(英文版) >干堆排尾对露天坑坑下采场稳定性影响的响应面预测分析
【24h】

干堆排尾对露天坑坑下采场稳定性影响的响应面预测分析

机译:干堆排尾对露天坑坑下采场稳定性影响的响应面预测分析

获取原文
获取原文并翻译 | 示例
       

摘要

Deformation prediction and the analysis of underground goaf are important to the safe and efficient recovery of residual ore when shifting from open-pit mining to underground mining. To address the comprehensive problem of stability in the double mined-out area of the Tong-Lv-Shan (TLS) mine, which employed the dry stacked gangue technology, this paper applies the function fitting theory and a regression analysis method to screen the sensitive interval of four influencing factors based on single-factor experiments and the numerical simulation software FLAC3D. The influencing factors of the TLS mine consist of the column thickness (d), gob area span (D), boundary pillar thickness (h) and height of tailing gangue (H). The fitting degree between the four factors and the displacement of the gob roof (W) is reasonable because the correlation coefficient (R2) is greater than 0.9701. After establishing 29 groups that satisfy the principles of Box-Behnken design (BBD), the dry gangue tailings process was re-simulated for the selected sensitive interval. Using a combination of an analysis of variance (ANOVA), regression equations and a significance analysis, the prediction results of the response surface methodology (RSM) show that the significant degree for the stability of the mined-out area for the factors satisfies the relationship of h>D>d>H. The importance of the four factors cannot be disregarded in a comparison of the prediction results of the engineering test stope in the TLS mine. By comparing the data of monitoring points and function prediction, the proposed method has shown promising results, and the prediction accuracy of RSM model is acceptable. The relative errors of the two test stopes are 1.67% and 3.85%, respectively, which yield satisfactory reliability and reference values for the mines.%科学分析露天坑下采空区稳定性是实现地下残矿安全高效回采的关键.在对铜绿山矿地下残矿进行回采的同时,利用上部露天坑回填干堆尾砂,为研究该复杂条件下的采场变形问题,采用单因素分析和FLAC3D数值软件,运用函数拟合和回归分析将间柱宽度d、空区跨度D、境界顶柱厚度h、尾砂堆高H等4个影响因素对空区位移的影响进行敏感区间筛选,结果表明4个因子与位移量W的拟合度较高,相关系数R2≥0.9701.建立29组满足Box-Behnken中心组合设计原则的响应面数组,对敏感区间下的尾砂堆积过程进行模拟,并结合方差、回归拟合及显著性分析,得到影响采空区稳定性的显著程度依次为 h>D>d>H,且4个均为不可忽视的重要因素.最后,将预测模型对工程实验采场变形情况进行预测分析及误差验证.验证结果表明,函数预测较好,相对误差分别达到1.67%、3.85%,具有较强的参考价值和应用可靠性.
机译:变形预测和地下GOF的分析对于从露天挖掘到地下采矿时的残留矿石安全有效地回收的重要性。为了解决铜山(TLS)矿区双挖掘区域的稳定性稳定性,该纸张采用干堆叠煤矸石技术,采用功能拟合理论和回归分析方法来筛选敏感基于单因素实验的四种影响因素的区间和数值模拟软件FLAC3D。 TLS矿的影响因素包括柱厚度(D),凝球区域跨度(D),边界柱厚度(H)和尾桨煤矸石(H)的高度。四个因子和血管屋顶(W)的位移之间的拟合度是合理的,因为相关系数(R2)大于0.9701。在建立满足Box-Behnken设计(BBD)原理的29个组后,为所选择的敏感间隔重新模拟干圆形尾矿过程。使用方差分析(ANOVA),回归方程和显着性分析的组合,响应面方法(RSM)的预测结果表明,挖掘区域的稳定性的显着程度满足了这种关系h> d> d> h。在TLS矿井工程试验术的预测结果的比较中,不能忽略四个因素的重要性。通过比较监测点和功能预测的数据,所提出的方法已经显示了有希望的结果,并且RSM模型的预测精度是可接受的。两次试验止区位的相对误差分别为1.67%和3.85%,其占地面积的令人满意的可靠性和参考值。%科学分享到天下采空区稳定性是实现地下残矿安全高度的问题。在对铜绿山矿地下残矿进行的何时,利用上游天天坑坑堆尾砂,为该该条件条件采场问题,使用单位分享和FLAC3D数码软件,运用函数结合和回归分享到间柱宽度D,空区跨度D,境界顶柱厚度H,尾砂堆高H等4个影响因素对空区位移影响进敏感空间筛选,结果结果明4个因子与与与料合成较高,相关数量r2≥0.9701。建立29组满足box-behnken中心综合征设计原则响应数组,对敏感空间下的尾堆积过程行程模拟,并料联合方向,回归料合并显着性分享,得到影响采空区稳定性的显着程度为什么为h> d> d> h,且4个均为不可能的。最后,将预测模型对工程实验采场情况进行预测预测及误差误差。验证结果说明,函数预测较好,相对误差分类达达1.67%,3.85%,有些人,有可能可以。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号