首页> 中文期刊>汽车安全与节能学报 >小重叠正面斜角碰撞工况对车体耐撞性的影响

小重叠正面斜角碰撞工况对车体耐撞性的影响

     

摘要

为了评价乘用汽车在小重叠正面斜角碰撞事故中的耐撞性,应用HyperWorks和LS-DYNA软件建立了两辆同款运动型多功能车(SUV)发生正面碰撞时的有限元模型.通过对数种25%重叠率碰撞工况的仿真计算,依据B柱下端最大加速度、A柱上部最大折弯角、前围板侵入量3项重要评价指标,分析了碰撞角度与速度对两辆车体耐撞性的影响.结果表明:该款车型在0°~45°小重叠率正面斜角碰撞中,耐撞性最差的工况出现于作为被突入车与突入车成0°~15°角发生高速碰撞时,其耐撞性会随着两车相对碰撞速度的提高而迅速变差.因此,可选择这种工况对该款车型的车体结构进行有针对性的优化设计.%A finite element model of two colliding sports utility vehicle (SUV) cars of same type was developed to evaluate the crashworthiness of passenger car in small overlap frontal oblique impact accident by using HyperWorks and LS-DYNA software.Through simulating several impact conditions of 25% overlap,the influences of collision angle and velocity on the crashworthiness of two car bodies were analyzed in terms of three important evaluation indexes i.e.maximum acceleration at the bottom of B-pillar,maximum bending angle on the upper part of A-pillar and dash panel intrusion.The results show as follows:In a 0° ~ 45° small overlap frontal oblique impact,this type of car had its worst crashworthiness when it was collided as an inserted highspeed car by an inserting high-speed car at 0° ~ 15°;and with the increase of relative collision velocity of two cars,its crashworthiness deteriorated sharply.So the condition can be chosen for the pointed optimizing design to the car body.

著录项

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号