高浓度酚醛树脂生产废水处理工程实例

摘要

针对某磨料磨具厂酚醛树脂生产废水的高酚醛水质特点,采用Fenton—混凝沉淀—生物接触氧化工艺对废水进行处理.实际运行结果表明,在进水平均COD≤10 000 mg/L,甲醛≤1 200 mg/L时,出水COD≤110 mg/L,甲醛≤0.1 mg/L,出水水质达到《水污染物排放限值》(DB 44/26—2001)二级排放标准.工程实践证明,该工艺处理效果良好、出水水质稳定.%Aiming at the water quality of the wastewater containing highly concentrated phenol and formaldehyde from phenolic resin production, the wastewater has been treated by the combined process, Fenton —coagulation sedimentation-bio-contact oxidation. The results show that the effluent water quality reaches the second class discharge standard of Discharge Limits of Water Pollutants(DB 44/26—2001),under the following conditions: the average influent COD ≤ 10 000 mg/L,formaldehyde≤ 1 200 mg/L,effluent COD≤ 110 mg/L,and formaldehyde≤0.1 mg/L. The engineering practice proves that the treatment efficiency of the process is pretty good,and the effluent water quality is steady.