强化复合地板生产线双端铣刀轴配置改进设计

摘要

With the changes in the buckle type and profile of flowing, the core equipment double-end milling cutter shaft configuration 8+8 mode (cutter shaft sequence: stocking cutter, forming cutter, trimming cutter, sprocket cutter, i.e. 4 positions, 8 shafts) of the laminate flooring production line imported from Homag, Germany has failed to meet production requirements. Therefore, double-end milling cutter shaft configuration has been improved, with positions adjusted (the highest shaft configuration reaches 6 positions with 12 shafts), with two sets of shafts added to the empty space on the ends of the double-end milling cutter, with special chamfer cutters to complete the chamfer processing, making the edge straightness and roughness of flooring products reach the quality standards stipulated by the state.%随着地板扣型及外形的变化，国内从德国豪迈公司引进的强化复合地板生产线的核心设备双端铣刀轴配置8+8方式（刀轴顺序：预切刀、成型刀、精修刀、扣刀，即：4工位8轴）已不能满足生产需求，因此对双端铣刀轴配置进行了改进，对工位进行了相应调整（目前刀轴最高配置达到6工位12轴），在双端铣末端空位加设了两套刀轴，并采用专用倒角刀加工地板倒角，使地板产品的边缘直线度和粗糙度达到国家规定的质量标准。