首页> 中文期刊> 《中国化学工程学报:英文版》 >Conformance control by a microgel in a multi-layered heterogeneous reservoir during CO_(2) enhanced oil recovery process

Conformance control by a microgel in a multi-layered heterogeneous reservoir during CO_(2) enhanced oil recovery process

         

摘要

Injecting CO_(2)into the underground for oil displacement and shortage is an important technique for carbon capture,utilization and storage(CCUS).One of the main problems during the CO_(2)injection is the channeling plugging.Finding an effective method for the gas channeling plugging is a critical issue in the CO_(2)EOR process.In this work,an acid-resistance microgel named dispersed particle gel(DPG)was characterized and its stability was tested in the CO_(2)environment.The microgel size selection strategies for the homogeneous and heterogeneous reservoirs were respectively investigated using the single core flooding and three parallel core flooding experiments.Moreover,the comparison of microgel alternate CO_(2)(MAC)injection and water alternate CO_(2)(WAC)injection in the dual core flooding experiments were presented for the investigation of the role of microgel on the conformance control in CO_(2)flooding process.The results have shown that the microgel featured with ANH and CAN groups can keep its morphology after aging 7 days in the CO_(2)environment.Where,the small microgel with unobstructed migration and large microgel with good plugging efficiency for the high permeability zone were respectively featured with the higher recovery factor in homogeneous and heterogeneous conditions,which indicate they are preferred used for the oil displacement and conformance control.Compared to WAC injection,MAC injection had a higher incremental recovery factor of 12.4%.It suggests the acid-resistance microgel would be a good candidate for the conformance control during CO_(2)flooding process.

著录项

相似文献

  • 中文文献
  • 外文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号