Although common calcium-containing minerals such as calcite and gypsum may fix arsenic, the interaction between modified calcic minerals and arsenic has seldom been reported. The uptake behavior of As(Ⅲ)/As(V) from aqueous solutions by calcium sulfate whisker(CSW, dihydrate or anhydrite) synthesized through a cooling recrystallization method was explored. A series of batch experiments were conducted to examine the effect of p H, reaction time, whisker dosage, and initial As concentration. X-ray diffraction(XRD) and scanning electron microscopy(SEM) were used to characterize the samples prepared. The results showed that p H of the aqueous solution was an important parameter for As(Ⅲ)/As(V) uptake, and an excellent removal efficiency could be achieved under strongly alkaline condition. The data from batch experiments for reaction of As(V) with calcium sulfate dihydrate whisker(CSDW) and calcium sulfate anhydrous whisker(CSAW) were well described with extended Langmuir EXT1 model, from which theoretic maximum adsorption capacity of 46.57 mg As(V)·(g CSDW)-1and 39.18 mg As(V)·(g CSAW)-1were obtained. Some calcium arsenate solids products,such as Ca As O3(OH)(weilite, syn), Ca3(As O4)2(calcium arsenate), Ca O–As2O5, Ca–As–O, Ca5(As O4)3OH·x H2O(calcium arsenate hydroxide hydrate), and Ca H(As O4)·2H2O(hydrogen calcium arsenic oxide hydrate), were detected at p H = 12.5 through XRD analysis. This indicates that the interaction mechanism between As(V) and CSW is a complex adsorption process combined with surface dissolution and chemical precipitation.
展开▼
