首页> 外文期刊>海洋学报(英文版) >Vessel fusion tracking with a dual-frequency high-frequency surface wave radar and calibrated by an automatic identification system
【24h】

Vessel fusion tracking with a dual-frequency high-frequency surface wave radar and calibrated by an automatic identification system

机译:双频高频表面波雷达进行的船只融合跟踪,并由自动识别系统校准

获取原文
获取原文并翻译 | 示例
       

摘要

High-frequency surface wave radar (HFSWR) and automatic identification system (AIS) are the two most important sensors used for vessel tracking. The HFSWR can be applied to tracking all vessels in a detection area, while the AIS is usually used to verify the information of cooperative vessels. Because of interference from sea clutter, employing single-frequency HFSWR for vessel tracking may obscure vessels located in the blind zones of Bragg peaks. Analyzing changes in the detection frequencies constitutes an effective method for addressing this deficiency. A solution consisting of vessel fusion tracking is proposed using dual-frequency HFSWR data calibrated by the AIS. Since different systematic biases exist between HFSWR frequency measurements and AIS measurements, AIS information is used to estimate and correct the HFSWR systematic biases at each frequency. First, AIS point measurements for cooperative vessels are associated with the HFSWR measurements using a JVC assignment algorithm. From the association results of the cooperative vessels, the systematic biases in the dual-frequency HFSWR data are estimated and corrected. Then, based on the corrected dual-frequency HFSWR data, the vessels are tracked using a dual-frequency fusion joint probabilistic data association (JPDA)-unscented Kalman filter (UKF) algorithm. Experimental results using real-life detection data show that the proposed method is efficient at tracking vessels in real time and can improve the tracking capability and accuracy compared with tracking processes involving single-frequency data.
机译:高频表面波雷达(HFSWR)和自动识别系统(AIS)是用于船只跟踪的两个最重要的传感器。 HFSWR可用于跟踪检测区域中的所有船只,而AIS通常用于验证合作船只的信息。由于海杂波的干扰,采用单频HFSWR进行船只跟踪可能会使位于布拉格峰盲区的船只模糊。分析检测频率的变化是解决此缺陷的有效方法。提出了一种使用AIS校准的双频HFSWR数据由血管融合跟踪组成的解决方案。由于HFSWR频率测量和AIS测量之间存在不同的系统偏差,因此AIS信息用于估计和校正每个频率下的HFSWR系统偏差。首先,使用JVC分配算法将合作船的AIS点测量值与HFSWR测量值相关联。从合作船的关联结果,估计和纠正双频HFSWR数据中的系统偏差。然后,基于校正后的双频HFSWR数据,使用双频融合联合概率数据协会(JPDA)-无味卡尔曼滤波器(UKF)算法跟踪血管。使用实际检测数据的实验结果表明,与涉及单频数据的跟踪过程相比,该方法能有效地实时跟踪船舶,并能提高跟踪能力和准确性。

著录项

  • 来源
    《海洋学报(英文版)》 |2018年第7期|131-140|共10页
  • 作者单位

    College of Computer Science, Inner Mongolia University, Hohhot 010021, China;

    College of Electronic Information Engineering, Inner Mongolia University, Hohhot 010021, China;

    College of Electronic Information Engineering, Inner Mongolia University, Hohhot 010021, China;

    The First Institute of Oceanography, State Oceanic Administration, Qingdao 266061, China;

    College of Computer Science, Inner Mongolia University, Hohhot 010021, China;

  • 收录信息 中国科学引文数据库(CSCD);中国科技论文与引文数据库(CSTPCD);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-19 03:57:49
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号