首页> 外文学位 >Normal and intercritical tempering behavior of a low-carbon, copper-bearing steel designed for ultraservice applications

【24h】

Normal and intercritical tempering behavior of a low-carbon, copper-bearing steel designed for ultraservice applications

机译：专为超级服务应用设计的低碳，含铜钢的正火和临界回火行为

获取原文

获取原文并翻译 | 示例

页面导航

著录项
相似文献
相关主题

著录项

作者
Foley, Robert Patrick;
展开▼
作者单位

Northwestern University;

展开▼
授予单位 Northwestern University;
学科
学位 Ph.D.
年度 1992
页码 218 p.
总页数 218
原文格式 PDF
正文语种 eng
中图分类
关键词
入库时间 2022-08-17 11:58:24

相似文献

外文文献
中文文献
专利

1. Influence of intercritical tempering temperature on impact toughness of a quenched and tempered medium-Mn steel: Intercritical tempering versus traditional tempering [J] . C. Sun, S.L. Liu, R.D.K. Misra, Materials Science and Engineering . 2018,第jana10期

机译：临界回火温度对调质中锰钢冲击韧性的影响：临界回火与传统回火
2. Improved strength-ductility-toughness balance of a precipitation-strengthened low-carbon medium-Mn steel by adopting intercritical annealing-tempering process [J] . Y. Zou, Y.B. Xu, G. Wang, Materials Science and Engineering . 2021,第Jana20期

机译：通过采用跨临界退火过程改善沉淀加强的低碳介质 - Mn钢的强度 - 延展性 - 韧性平衡
3. Characterization and Modeling of Hot Deformation Behavior of a Copper-Bearing High-Strength Low-Carbon Steel Microalloyed with Nb [J] . Seiyedbeigi M. T., Hosseini S. R., Eshaghi A. Journal of Materials Engineering and Performance . 2019,第7期

机译：用NB微合金化铜轴承高强度低碳钢热变形行为的特征及建模
4. Effect of Tempering on Microstructure and Mechanical Properties of Ultra Low Carbon Heavy Steel Plate with Intercritical Quenching [C] . Dehui Zou, Zhifang Peng, Ruomin Wang International Conference on Advances in Materials and Manufacturing Processes . 2011

机译：回火对跨临界淬火超低碳重板微观结构和力学性能的影响
5. Effect of heating rate on intercritical annealing of low-carbon cold-rolled steel [D] . Thomas, Larrin. 2015

机译：加热速率对低碳冷轧钢临界退火的影响
6. Impact Toughness of Subzones in the Intercritical Heat-Affected Zone of Low-Carbon Bainitic Steel [O] . Zhenshun Li, Xuemin Zhao, Dongri Shan 2018

机译：低碳贝氏体钢在临界热影响区中子区的冲击韧性
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. The 10Ni-Cr-Mo-Co Steel Weldment -- Its Fabricability and Structural Suitability for Ultraservice Applications. [R] . Dabkowski, D. S., Konkol, P. J., Novak, S. R., 1970

机译：10Ni-Cr-mo-Co钢焊接件 - 适用于超多种应用的可加工性和结构适用性。

Normal and intercritical tempering behavior of a low-carbon, copper-bearing steel designed for ultraservice applications

著录项

相似文献

相关主题

期刊订阅