首页> 外文学位 >THE MIGRATION BEHAVIOUR OF MODEL PLASTICS ADDITIVES FROM POLYAMIDE COATINGS IN RELATION TO THEIR DONOR-ACCEPTOR COMPLEX FORMATION (FOOD, ANTI-OXIDANTS, PACKAGING).
【24h】

THE MIGRATION BEHAVIOUR OF MODEL PLASTICS ADDITIVES FROM POLYAMIDE COATINGS IN RELATION TO THEIR DONOR-ACCEPTOR COMPLEX FORMATION (FOOD, ANTI-OXIDANTS, PACKAGING).

机译:聚酰胺涂层模型塑料添加剂的迁移行为与其配体-受体复合物的形成有关(食品,抗氧化剂,包装)。

获取原文
获取原文并翻译 | 示例

摘要

The work presented in this text looks into the increasing problem of the migration of additives, necessary for the production of plastic packaging materials into foodstuffs and their simulants. It can be seen that over the years much work has already been undertaken in order to obtain an understanding of the causes of migration. Also the degree of migration for a multitude of additives from a variety of plastics has been observed. Furthermore, mathematical models representing the rates of migration for various classes of migration have been prepared and generally agreed. Therefore, the work described here details the possible use of the formation of charge transfer complexes as being a means of preventing the occurrence of migration or at least a way in which the rate of migration can be slowed down sufficiently so that the additive is no longer a health problem. The charge transfer complex is formed between an electron rich centre in the polymer and an electron deficient additive. In the systems studied here the electron rich centre was incorporated in a polyamide whilst fluoranil and TCNQ were taken to be model plastics additives. A common antioxidant, BHT, was taken as a standard since this was of similar molecular size and weight to the two model additives. Standardised test conditions of 10 days at 40(DEGREES)C and 65% relative humidity were employed throughout the experimental period in which distilled water was used as the simulant. The results showed that whilst an appreciable amount of the BHT was observed to have migrated the degree of migration of the two model additives was not measurable by the TLC method employed even though the level of detection for fluoranil was equivalent to that of BHT whilst that for TCNQ was at least an order of magnitude lower. The model systems were then studied in solution by a spectrophotometric technique using the methods of analysis developed by Benesi and Hildebrand and Foster.
机译:本文中介绍的工作研究了越来越多的添加剂迁移问题,这是将塑料包装材料生产成食品及其模拟物所必需的。可以看出,多年来,为了了解移徙原因,已经进行了许多工作。还观察到多种添加剂从多种塑料中的迁移程度。此外,已经准备并普遍同意代表各种移民类别的移民率的数学模型。因此,此处描述的工作详述了电荷转移配合物的形成的可能用途,作为防止迁移发生的手段,或者至少可以充分降低迁移速度以使添加剂不再存在的方式。健康问题。电荷转移络合物在聚合物中富电子的中心与缺电子的添加剂之间形成。在这里研究的系统中,富电子中心被掺入聚酰胺中,而荧烷和TCNQ被视为模型塑料添加剂。常用的抗氧化剂BHT作为标准品,因为它的分子大小和重量与两种模型添加剂相似。在整个实验期间,采用40℃(相对温度)和65%相对湿度的10天标准测试条件,其中以蒸馏水作为模拟物。结果表明,尽管观察到了相当数量的BHT迁移,但是即使使用的芴酮的检测水平与BHT的检测水平相同,采用的TLC方法也无法测定两种模型添加剂的迁移程度。 TCNQ至少降低了一个数量级。然后使用Benesi和Hildebrand和Foster开发的分析方法,通过分光光度法在溶液中研究模型系统。

著录项

  • 作者

    SHAW, ROBERT ALFONS.;

  • 作者单位

    Universitaire Instelling Antwerpen (Belgium).;

  • 授予单位 Universitaire Instelling Antwerpen (Belgium).;
  • 学科 Engineering Packaging.
  • 学位 Dr.
  • 年度 1984
  • 页码 139 p.
  • 总页数 139
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 包装工程;
  • 关键词

  • 入库时间 2022-08-17 11:51:14

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号