首页> 外文学位 >Lung tumor tracking, trajectory reconstruction, and motion artifact removal using rotational cone-beam projections.
【24h】

Lung tumor tracking, trajectory reconstruction, and motion artifact removal using rotational cone-beam projections.

机译:肺肿瘤追踪,轨迹重建和使用旋转锥束投影去除运动伪影。

获取原文
获取原文并翻译 | 示例

摘要

Management of lung tumor motion is a challenging and important problem for modern, highly conformal radiotherapy. Poorly managed tumor motion can lead to imaging artifacts, poor target coverage, and unnecessarily high dose to normal tissues. The goals of this dissertation are to develop a real-time localization algorithm that is applicable to rotational cone-beam projections acquired during regular (&sim60 seconds) cone-beam computed tomography (CBCT) scans, and to use these tracking results to reconstruct a tumor's trajectory, shape and size immediately prior to treatment.Direct tumor tracking is performed via a multiple template matching algorithm where templates are derived from digitally reconstructed radiographs (DRRs) generated from four-dimensional computed tomography (4DCT). Three-dimensional (3D) tumor trajectories are reconstructed by binning twodimensional (2D) tracking results according to their corresponding respiratory phases. Within each phase bin a point is calculated approximating the 3D tumor position, resulting in a 3D phase-binned trajectory. These 3D trajectories are used to construct motion blurring functions which are in turn used to remove motion blurring artifacts from reconstructed CBCT volumes with a deconvolution algorithm. Finally, the initial direct tracking algorithm is combined with diaphragm-based tracking to develop a more robust "combined" tracking algorithm.Respiratory motion phantoms (digital and physical), and example patient cases were used to test each technique. Direct tumor tracking performed well for both phantom cases, with sub-millimeter root mean square error (e rms) in the axial and tangential imager dimensions. In patient studies the algorithm performed well for many angles, but exhibited large errors for some projections. Accurate 3D trajectories were successfully reconstructed for patients and phantoms. Errors in reconstructed trajectories were smaller than the errors in the direct tracking results in all cases. The deblurring algorithm performed excellently in phantom studies. Deblurring was also effective on an example patient case, though the benefits were less stark. Finally, the combined tracking algorithm performed equally to or better than direct tumor tracking in the phantom and patient cases examined. While the preliminary results for each technique are promising, the algorithms must be tested on a larger data set with well defined ground truth to investigate potential clinical applications.
机译:对于现代高度保形的放射治疗,管理肺部肿瘤运动是一个具有挑战性和重要的问题。肿瘤运动处理不当会导致成像伪影,较差的靶标覆盖范围以及对正常组织不必要的高剂量。本文的目的是开发一种实时定位算法,该算法适用于在常规(和sim60秒)锥形束计算机断层扫描(CBCT)扫描期间获取的旋转锥形束投影,并使用这些跟踪结果来重建肿瘤的直接通过多模板匹配算法进行肿瘤追踪,其中模板是从四维计算机断层扫描(4DCT)生成的数字重建X线照片(DRR)导出的。通过将二维(2D)跟踪结果根据其对应的呼吸相位进行分箱来重建三维(3D)肿瘤轨迹。在每个相仓中,计算一个接近3D肿瘤位置的点,从而产生3D相结合的轨迹。这些3D轨迹用于构造运动模糊功能,进而使用反卷积算法从重建的CBCT体积中去除运动模糊伪像。最后,将初始直接跟踪算法与基于隔膜的跟踪相结合,以开发出更强大的“组合”跟踪算法。呼吸运动体模(数字和物理)以及示例患者案例用于测试每种技术。在两种幻影病例中,直接肿瘤追踪均表现良好,轴向和切向成像器尺寸均具有亚毫米的均方根误差(e rms)。在患者研究中,该算法在许多角度上均表现良好,但对某些投影显示出较大的误差。成功地为患者和体模重建了精确的3D轨迹。在所有情况下,重构轨迹的误差都小于直接跟踪结果的误差。去模糊算法在幻像研究中表现出色。去模糊对示例患者病例也有效,尽管其益处不那么明显。最终,在所检查的体模和患者病例中,组合跟踪算法的性能与直接肿瘤跟踪相同或更好。尽管每种技术的初步结果都令人鼓舞,但必须在具有明确定义的事实的更大数据集上测试算法,以研究潜在的临床应用。

著录项

  • 作者

    Lewis, John Henry.;

  • 作者单位

    University of California, San Diego.;

  • 授予单位 University of California, San Diego.;
  • 学科 Health Sciences Radiology.Physics Radiation.
  • 学位 Ph.D.
  • 年度 2010
  • 页码 171 p.
  • 总页数 171
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-17 11:36:50

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号