首页> 外文学位 >APPLICATION OF MULTI-GROUP DIFFUSION THEORY TO MECHANISTIC MODELLING OF LEACHING BEHAVIOR OF SOLIDIFIED LOW-LEVEL RADIOACTIVE WASTE FORMS.
【24h】

APPLICATION OF MULTI-GROUP DIFFUSION THEORY TO MECHANISTIC MODELLING OF LEACHING BEHAVIOR OF SOLIDIFIED LOW-LEVEL RADIOACTIVE WASTE FORMS.

机译:多组扩散理论在固结低级放射性废料形态浸出行为力学模型建模中的应用。

获取原文
获取原文并翻译 | 示例

摘要

The application of multi-concentration group mathematical modelling to the leaching of radionuclide waste-forms which have continuous porous matrix such as cemented waste form is described. The modelling is illustrated analysing a hypothetical of some transport mechanisms such as molecular diffusion, ionic migration and convective flow for release of interest radionuclide from a solidified waste form which contains discrete particles of radioactive Sr-85 nuclides into the aqueous environment. The group parameters are derived from the classical electrochemistry concept of ion transport in dilute electrolytic solution. The numerical analysis is based on the Crank-Nicolson Implicit Methods which assures the stability of the solution at a practical time step. The results show that, for a short-time period of leaching in demineralized water the leaching behavior follows the predominating diffusion mechanism. After this point, the role of other processes apparent and continue until all radionuclides in the cement waste are leached out when compared to the Semi-Infinite Diffusion model which is based on pure diffusion mechanism.;The multi-concentration group model can also be applied to long-term prediction of complicated release mechanisms of the radionuclides in the waste form of a particular disposal environment, unless the variables of interest such as the corrosion rate, the chemical reaction, erosion rate and etc. are determined by experiment or theoretical hypothesis. The appropriate differential equation then can be solved by the same general numerical approach. Also, the results of the modelling indicate which parameters should be measured experimentally in order to provide a quantitative test of the hypothetical release mechanism.
机译:描述了多浓度群数学模型在具有连续多孔基质如胶结废物形式的放射性核素废物形式的浸出中的应用。说明了该模型,分析了一些传输机制(例如分子扩散,离子迁移和对流)的假设,这些机制用于从固化的废物形式中释放感兴趣的放射性核素,该废物形式中含有离散的放射性Sr-85核素颗粒进入水性环境。组参数源自稀电解质溶液中离子迁移的经典电化学概念。数值分析基于Crank-Nicolson隐式方法,可确保在实际时间步中解决方案的稳定性。结果表明,在短时间内在软化水中浸出,浸出行为遵循主要的扩散机理。此后,与基于纯扩散机制的半无限扩散模型相比,其他过程的作用显而易见并一直持续到水泥废料中的所有放射性核素被浸出为止;;也可以应用多浓度群模型除非能够通过实验或理论假设确定感兴趣的变量,例如腐蚀速率,化学反应,腐蚀速率等,否则不能长期预测特定处置环境中废物形式的放射性核素的复杂释放机理。然后可以通过相同的通用数值方法求解适当的微分方程。此外,建模结果表明应通过实验测量哪些参数,以便对假设的释放机理进行定量测试。

著录项

  • 作者

    NIMNUAL, SOMKID.;

  • 作者单位

    The University of Arizona.;

  • 授予单位 The University of Arizona.;
  • 学科 Engineering Nuclear.
  • 学位 Ph.D.
  • 年度 1987
  • 页码 225 p.
  • 总页数 225
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号