首页> 外文学位 >Underwater measurement of the sound -intensity vector: Its use in locating sound sources, and in measuring the sound power of stationary and moving sources.
【24h】

Underwater measurement of the sound -intensity vector: Its use in locating sound sources, and in measuring the sound power of stationary and moving sources.

机译:水下声强矢量的测量:其用于定位声源以及测量固定和移动声源的声功率。

获取原文
获取原文并翻译 | 示例

摘要

Instrumentation was developed to measure the components of the sound-intensity vector (sound-power flow per unit area) in water. It consists of a probe with four hydrophones at the vertices of a regular tetrahedron and associated equipment including three two-channel FFT analyzers. Finite-difference approximations and the cross-spectral relation were used to determine the components of the sound-intensity vector. The hydrophones were closely spaced, allowing measurements to be made in a frequency range up to about 13 kHz. The accuracy of the probe in measuring the direction to a sound source was tested under different conditions. First gating methods were used to remove the effect of noise interference and it was shown that the accuracy of direction measurement was within +/- 2 degrees. Tests were then conducted to determine the effect of different types of interference: (a) boundary reverberation, (b) ambient background noise and (c) another sound source. Various simple signal-processing techniques were used to counteract these interferences. Data are presented in pitch-azimuth Cartesian direction of sound plots, where these plots provide a three-dimensional view of the ambient sound field the incident on the probe. Several techniques were used to separate the directions of multiple sound sources such as (a) spectral weighting and (b) spectral subtraction. In other tests, the probe was used to track a moving source and determine its sound power. The moving source was a driven hydrophone whose sound power was (a) determined from the measured voltage applied to the hydrophone and the response curves supplied by the hydrophone manufacturer and (b) measured when the hydrophone is stationary. These were compared with the sound power of the moving hydrophone which was found to be about 14--18% or 0.5--0.7 dB larger. It is believed that this is the first time the sound power of a moving source has been measured.
机译:开发了用于测量水中声强矢量(单位面积的声功率流)分量的仪器。它由一个在常规四面体的顶点处具有四个水听器的探头和相关设备组成,包括三个三通道FFT分析仪。使用有限差分近似和互谱关系来确定声强矢量的分量。水听器间隔很近,可以在高达约13 kHz的频率范围内进行测量。在不同条件下测试了探头测量声源方向的准确性。第一种选通方法用于消除噪声干扰的影响,结果表明方向测量的精度在+/- 2度以内。然后进行测试以确定不同类型的干扰的影响:(a)边界混响,(b)环境背景噪声和(c)另一个声源。各种简单的信号处理技术被用来抵消这些干扰。数据以音高曲线的笛卡尔方位角笛卡尔方向表示,其中这些曲线图提供了入射到探头上的环境声场的三维视图。使用了几种技术来分离多个声源的方向,例如(a)频谱加权和(b)频谱减法。在其他测试中,该探头用于跟踪移动的声源并确定其声功率。移动源是受驱动的水听器,其声功率是(a)根据施加到水听器的测量电压和水听器制造商提供的响应曲线确定的,(b)是水听器静止时测量的。将它们与移动水听器的声功率进行比较,发现该声水听器的声功率约大14--18%或0.5--0.7 dB。可以相信这是第一次测量移动源的声功率。

著录项

  • 作者

    Wei, Wei.;

  • 作者单位

    The University of Mississippi.;

  • 授予单位 The University of Mississippi.;
  • 学科 Physics Acoustics.;Engineering Marine and Ocean.
  • 学位 Ph.D.
  • 年度 1994
  • 页码 118 p.
  • 总页数 118
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-17 11:49:59

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号