首页> 外文学位 >Quantification of deformation fabrics in various rocks using magnetic anisotropy.
【24h】

Quantification of deformation fabrics in various rocks using magnetic anisotropy.

机译:使用磁各向异性对各种岩石中的变形织物进行定量。

获取原文
获取原文并翻译 | 示例

摘要

Accurate quantification of preferred orientation fabrics in deformed rocks with magnetic anisotropy requires an understanding of the behavior of the mineralogical carrier(s) of magnetic anisotropy. Rock magnetic and petrologic studies were conducted to identify which mineral(s) carry the anisotropy in slates and deformed anorthosites.; In the Martinsburg Formation, Lehigh Gap, Pennsylvania, anisotropy of magnetic susceptibility (AMS) is controlled by chlorite. Characteristics of the AMS ellipsoids are consistent with numerical model results of composite magnetic fabrics arising from the addition of two orthogonal, oblate component fabrics. The composite AMS fabrics in the Martinsburg Formation result from progressive dissolution/new-growth of chlorite during cleavage formation. The composite nature of the AMS fabrics shows that the shape of the AMS ellipsoid cannot be used to quantify the mineral fabrics of these slates. The combined results of anhysteretic remanent magnetization anisotropy (ARMA), numerical models, and paleomagnetism indicate that magnetite in the Martinsburg also dissolved and recrystallized as cleavage formed. The shales have bedding-parallel magnetite fabrics, and preserve a primary (Ordovician) natural remanence. Magnetite dissolution/new-growth remagnetized the slates, and produced composite ARMA fabrics in the pencil slates. In contrast to AMS, the shape and orientation of the end-member shales and slates are accurately recorded by the ARMA fabrics.; The AMS fabrics of mylonites in the Parry Sound shear zone, Ontario, Canada, are controlled by magnetite. Based on a temperature of 630{dollar}spcirc pm{dollar} 50 C from geothermometry and extrapolation of experimentally-derived constitutive equations, the deformation mechanism of magnetite in this shear zone was dislocation creep (crystal plasticity). An empirical correlation between shear strain and AMS ellipsoid shape {dollar}(rm ksb{lcub}max{rcub}/ksb{lcub}min{rcub}) = (X/Z)sp{lcub}0.14{rcub}{dollar} was obtained for these rocks. Such high shear strains ({dollar}gamma{dollar} = 9 to 12) cannot be obtained from rigid rotation of magnetite, but are consistent with plastic deformation of magnetite. Thus, the AMS fabrics accurately quantify both the magnitude and orientation of the tectonic fabric and finite strain in the Parry Sound shear zone.
机译:对具有磁各向异性的变形岩石中的首选定向织物进行准确定量,需要了解磁各向异性的矿物载体的行为。进行了岩石磁学和岩石学研究,以确定哪些矿物在板岩和变形的钙长石中具有各向异性。在宾夕法尼亚州里海峡的马丁斯堡组,磁化率的各向异性(AMS)受亚氯酸盐控制。 AMS椭球的特性与复合磁性织物的数值模型结果一致,该结果是由于添加了两个正交的扁圆形成分织物而产生的。马丁斯堡组中的复合AMS织物是由卵裂形成过程中亚氯酸盐的逐渐溶解/新生长产生的。 AMS织物的复合性质表明,AMS椭球的形状不能用于量化这些板岩的矿物织物。磁滞各向异性磁化各向异性(ARMA),数值模型和古磁学的综合结果表明,马丁斯堡中的磁铁矿也随着解理作用的形成而溶解和重结晶。页岩具有平行于顺层的磁铁矿织物,并保留了原始(奥陶纪)自然剩磁。磁铁矿溶解/新生长使板岩重新磁化,并在铅笔板岩中生产复合ARMA织物。与AMS相比,ARMA织物可准确记录端部件页岩和板岩的形状和方向。加拿大安大略省帕里桑德剪切带的mylonites AMS织物由磁铁矿控制。根据地热法测得的温度630 sp pm pm dol dol 50℃,并根据实验得出的本构方程外推,磁铁矿在该剪切区的变形机理为位错蠕变(晶体可塑性)。剪切应变与AMS椭球形状{经验}(rm ksb {lcub} max {rcub} / ksb {lcub} min {rcub})=(X / Z)sp {lcub} 0.14 {rcub} {dollar}之间的经验相关性是从这些岩石中获得的。这样的高剪切应变({γ}γ{dollar} = 9至12)不能从磁铁矿的刚性旋转中获得,但是与磁铁矿的塑性变形相一致。因此,AMS织物可以准确量化构造织物的大小和方向以及帕里桑德剪切带中的有限应变。

著录项

  • 作者

    Housen, Bernard Arthur.;

  • 作者单位

    University of Michigan.;

  • 授予单位 University of Michigan.;
  • 学科 Geology.; Geophysics.
  • 学位 Ph.D.
  • 年度 1994
  • 页码 152 p.
  • 总页数 152
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 地质学;地球物理学;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号