首页> 外文学位 >The crystal structure and molecular modeling of the three novel polymers.
【24h】

The crystal structure and molecular modeling of the three novel polymers.

机译:三种新型聚合物的晶体结构和分子模型。

获取原文
获取原文并翻译 | 示例

摘要

X-ray methods and molecular modeling have been used to investigate the structure of poly (1,2-difluoromethylene-1,2,3,3-tetrafluoro-4,4-dihydrofuran) (PDTE), poly({dollar}alpha, alpha, alphaspprime, alphaspprime{dollar}-tetrafluoro-p-xylylene)(F-PPX) and poly(monocyano-p-xylylene) (CN-PPX).; PDTE, a ring-containing fluoropolymer has been studied by the pressed films, which are more than 60% crystalline and small angle X-ray data show that these contain lamellae oriented with their long axes parallel to the surface. The wide angle X-ray data show that the chains are perpendicular to the film surface, and have an axial repeat of 9.62 A, probably containing two monomers (an axial advance of 4.81 A per monomer). Molecular mechanics modeling indicates that the most likely structure contains syndiotactic chains in which the monomers have the threo-configuration: such chains are ribbon-like, with an axial advance of {dollar}sim{dollar}4.8 A, in good agreement with the observed repeat.; Films of F-PPX prepared by vapor deposition polymerization are highly crystalline, and have uniplanar orientation. This orientation is maintained on drawing {dollar}times{dollar}10 at 350{dollar}spcirc{dollar}C, when the chains become aligned parallel to the direction of draw, leading to a texture of three dimensionally oriented crystals. 35 X-ray reflections are resolved by controlled rotation and tilting of the drawn specimen, and these can be indexed by a triclinic unit cell with dimensions a = 5.36 A, b = 5.92 A, c = 6.57 A (chain axis repeat), {dollar}alpha = 97.0spcirc, beta = 63.1spcirc{dollar} and {dollar}gamma = 73.1spcirc{dollar}, containing one monomer unit.; Films of poly(cyano-p-xylylene) (CN-PPX) synthesized by vapor deposition polymerization are highly crystalline and can be prepared with uni-planar orientation. This orientation is maintained after drawing the film 700% at 350{dollar}spcirc{dollar}C, when the chains become aligned parallel to the direction of draw, leading to a mosaic texture of doubly-oriented crystals. Three dimensional wide angle X-ray data show that the polymer has a monoclinic unit cell with dimensions a = 5.96 A, b = 13.52 A, c = 6.48 A and {dollar}beta = 135.9spcirc{dollar}, containing two monomer units from symmetry related chains. (Abstract shortened by UMI.)
机译:X射线方法和分子建模已用于研究聚(1,2-二氟亚甲基-1,2,3,3-四氟-4,4-二氢呋喃)(PDTE),聚({dollar} alpha, α,αspprime,αspprime{美元}-四氟对亚二甲苯基)(F-PPX)和聚(单氰基对亚二甲苯基)(CN-PPX)。 PDTE是一种含环的含氟聚合物,已通过压制薄膜进行了研究,该薄膜具有超过60%的结晶度,小角度X射线数据表明,这些薄膜包含定向为长轴与表面平行的薄片。广角X射线数据表明,这些链垂直于薄膜表面,并且轴向重复数为9.62 A,可能包含两种单体(每个单体的轴向提前量为4.81 A)。分子力学建模表明,最可能的结构包含间规链,其中单体具有苏式构型:此类链呈带状,轴向前进{dol} sim {dollar} 4.8 A,与观察到的一致重复。;通过气相沉积聚合制备的F-PPX薄膜具有高度结晶性,并且具有单平面取向。当链在平行于拉伸方向的方向排列时,在拉伸温度350℃时,在拉伸10倍时,该取向保持不变,从而产生三个尺寸取向的晶体。 35张X射线反射可通过受控旋转和倾斜拉伸的标本解决,并且可以通过斜边晶胞进行索引,其尺寸为a = 5.36 A,b = 5.92 A,c = 6.57 A(链轴重复),{美元}α= 97.0spcirc,β= 63.1spcirc {美元},{γ} = 73.1spcirc {美元},含有一个单体单元。通过气相沉积聚合法合成的聚(氰基-对-亚二甲苯基)(CN-PPX)膜具有高度结晶性,可以单面取向制备。当链在350 {spcirc {dollar} C下拉伸700%之后,当链平行于拉伸方向对齐时,会保持此方向,从而导致双取向晶体的镶嵌纹理。三维广角X射线数据显示,该聚合物具有单斜晶胞,尺寸为a = 5.96 A,b = 13.52 A,c = 6.48 A,{beta} = 135.9spcirc {dollar},其中包含两个单体单元对称相关链。 (摘要由UMI缩短。)

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号