Probabilistic modeling of decompression sickness, comparative hydrodynamics of cetacean flippers, optimization of CT/MRI protocols and evaluation of modified angiocatheters: Engineering methods applied to a diverse assemblage of projects.

摘要

The intent of the work discussed in this dissertation is to apply the engineering methods of theory/modeling, numerics/computation, and experimentation to a diverse assemblage of projects.;The first project discussed is the probabilistic modeling of decompression sickness (DCS). Three null models were developed and compared to a known decompression model that was optimized on dive trial data containing only marginal DCS and no-DCS events. It was found that although marginal DCS events are related to exposure to decompression, empirical dive data containing marginal and full DCS outcomes are not combinable under a single DCS model; therefore, marginal DCS should be counted as no-DCS events when optimizing probabilistic DCS models with binomial likelihood functions. The final portion of this project involved the exploration of a multinomial DCS model.;The next project discussed is comparative hydrodynamics of cetacean flippers. Cetacean flippers may be viewed as being analogous to modern engineered hydrofoils, which have hydrodynamic properties such as lift coefficient, drag coefficient and associated efficiency. The hydrodynamics of cetacean flippers have not previously been rigorously examined and thus their performance properties are unknown. By conducting water tunnel testing using scale models of cetacean flippers derived via computed tomography (CT) scans, as well as computational fluid dynamic (CFD) simulations, a baseline work is presented to describe the hydrodynamic properties of several cetacean flippers. It was found that flippers of similar planform shape had similar hydrodynamic performance properties.;The third project discussed is optimization of CT/MRI protocols. In order to optimize contrast material administration protocols for Computed Tomography (CT) and Magnetic Resonance Imaging (MRI), a custom-built physiologic flow phantom was constructed to model flow in the human body. This flow phantom was used to evaluate the effect of varying volumes, rates, and types of contrast material, use of a saline chase, and cardiac output on aortic enhancement characteristics. For CT, reducing the volume of contrast material decreased duration peak enhancement and reduced the maximum value of peak enhancement. Increasing the rate of contrast media administration increased peak enhancement and decreased duration of peak enhancement. Use of a saline chase resulted in an increase in peak enhancement. For higher volumes of contrast material, the effect of increasing the volume of saline chaser makes almost no difference while increasing the rate of injection makes a significant difference.;The next project discussed is evaluation of modified angiocatheters. In this study, a standard peripheral end hole angiocatheter was compared to those modified with side holes or side slits by using experimental techniques to qualitatively compare the contrast material exit jets, and by using numeric techniques to provide flow visualization and quantitative comparisons. Experimental images showed that modifying standard peripheral intravenous angiocatheters with side holes or side slits qualitatively changed the overall flow field and caused the exiting jet to become less well-defined. Modified angiocatheters may have the potential to reduce extravasation events in patients by reducing vessel wall shear stress.;The next project discussed involves studying the effect of leading-edge tubercles on cavitation characteristics for marine rudders. At lower Re, the tubercled rudders also maintained a higher value of lift post-stall than the smooth rudder. Cavitation onset for the tubercled rudders occurred at lower angles of attack and higher values of cavitation number than for the smooth rudder, but cavities on the tubercled rudders were localized in the slots as opposed to the smooth rudder where the cavity spread across the entire leading edge.;In the final project discussed, modeling of mass transfer in amphibian cone outer segments, a detailed derivation of a simplified (continuum, one-dimensional) mathematical model for the radio-labeled opsin density profile in the amphibian cone outer segment is presented. This model relies on only one free parameter, which was the mass transfer coefficient between the plasmalemma and disc region. The descriptive equations were nondimensionalized, and scale analysis showed that advective effects could be neglected as a first approximation for early times so that a simplified system could be obtained. (Abstract shortened by UMI.)