首页> 外文学位 >Finite Element Analysis of Abdomen Cross-Section during Trocar Insertion.
【24h】

Finite Element Analysis of Abdomen Cross-Section during Trocar Insertion.

机译:套管针插入过程中腹部横断面的有限元分析。

获取原文
获取原文并翻译 | 示例

摘要

Surgery is a typical medical invasive procedure. In surgical operations, there are two procedures for entering the site (area of operation). These are traditional open surgery and minimally invasive surgery. The traditional open surgery procedure is one which penetrates or breaks the skin or enters a body cavity. Examples include those that involve perforation, an incision, a catheterization, or other entry into the body. An open surgery means cutting skin and tissues so the surgeon has a direct access to the structures or organs involved. Open surgery involves large incisions, in which the tissues are exposed to the air. Minimally invasive medical procedure is defined as one that is carried out by entering the body through the skin or through a body cavity or anatomical opening, but with the smallest damage possible to these structures. Laparoscopic surgery also known as minimally invasive surgery is a modern surgical technique in which operations in the abdomen are performed through small incisions (usually 5 -- 15 mm) as opposed to larger incisions needed in laparotomy. In this procedure, 5 -- 10mm diameter instruments (graspers, scissors or clip applier) can be introduced by the surgeon into the abdomen through trocars (hollow tubes with a seal to keep the CO 2 from leaking).;The goal of this research study is to establish a relationship between the applied forces (by the trocar) to the displacement produced at the abdomen interface fascia and also carry it through to rupture. Biological tissue modeling has been the core focus area of this work. The present study attempts to model human abdomen behavior on existing multi-behavioral models available in software (ABAQUS). Multiple simulations under different material boundary conditions are done and are compared with experimental data. The stress-strain relationship obtained from these simulations will be used to build a trocar insertion training simulator, which will train medical students/surgeons in the future.
机译:手术是典型的医学侵入性手术。在外科手术中,有两种进入手术部位(手术区域)的程序。这些是传统的开放手术和微创手术。传统的开放式外科手术是穿透或破坏皮肤或进入体腔的手术。示例包括涉及穿孔,切口,导管插入或其他进入人体的过程。开放式手术意味着切割皮肤和组织,因此外科医生可以直接进入所涉及的结构或器官。开放式手术涉及大切口,其中组织暴露于空气中。微创医疗程序定义为通过皮肤,体腔或解剖学开口进入人体,但对这些结构造成的损害最小的一种。腹腔镜手术也称为微创手术,是一种现代外科手术技术,其中通过小切口(通常为5至15毫米)进行腹部手术,而不是开腹手术中需要的大切口。在此过程中,外科医生可通过套管针(带有密封件的空心管,以防止CO 2泄漏)将5-10mm直径的器械(抓草器,剪刀或施夹器)插入腹部。研究的目的是建立(通过套管针)施加的力与腹部界面筋膜产生的位移之间的关系,并使其通过直至破裂。生物组织建模一直是这项工作的重点领域。本研究试图在软件(ABAQUS)中现有的多行为模型上对人类腹部行为进行建模。在不同的材料边界条件下进行了多次模拟,并与实验数据进行了比较。从这些模拟中获得的应力-应变关系将用于构建套管针插入训练模拟器,该模拟器将在将来训练医学生/外科医生。

著录项

  • 作者

    Abraham, Anand.;

  • 作者单位

    State University of New York at Buffalo.;

  • 授予单位 State University of New York at Buffalo.;
  • 学科 Engineering Biomedical.;Health Sciences Surgery.;Engineering Mechanical.
  • 学位 M.S.
  • 年度 2013
  • 页码 64 p.
  • 总页数 64
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号