首页> 外文会议>Solid State Lasers XV: Technology and Devices >Continuous-wave visible laser by intracavity-doubled fiber laser
【24h】

Continuous-wave visible laser by intracavity-doubled fiber laser

机译:腔内双光纤激光器的连续波可见光激光器

获取原文
获取原文并翻译 | 示例

摘要

A novel continuous-wave blue-green laser was developed by the second-harmonic generation of the emission from Yb-doped gain fiber. The laser cavity consists of a fiber Bragg grating (FBG), a gain fiber, an aspheric lens, a dichroic mirror for output coupling of second harmonic, a periodically-poled LiNbO_3 (PPLN), and a high reflector. The intracavity-doubled fiber laser was pumped by a 580-mW, fiber pigtailed laser diode at 974 nm through the FBG The Yb laser emission from the fiber end was focused onto the high reflector, providing optical feedback and forming the resonator. The PPLN was placed near the flat end mirror, where the waist is formed, in order to increase the fundamental intensity. The emission wavelength can be selected by changing the FBG within the bandwidth of the gain fiber. An FBGs for 1017.6 nm was selected for the experiment. Circulating power of the fundamental wave in the cavity was measured to be approximately 1500 mW when a 5% output coupler was placed instead of high-reflecting mirror. Stable output in excess of 30 mW at 508.8 nm was obtained. The optical-optical efficiency from the pump power to the visible output was about 5%. The fluctuation of the laser output power was less than 0.5% for more than 2 hours without a power feedback loop. The M~2 value was measured to be 1.2. Wavelength-selectable lasers will be useful for applications including fluorescent microscopy, biological imaging, flow cytometry and spectroscopic analysis.
机译:通过二次谐波产生掺Y增益光纤的发射,开发了一种新型的连续波蓝绿色激光器。激光腔由光纤布拉格光栅(FBG),增益光纤,非球面透镜,用于二次谐波输出耦合的二向色镜,周期性极化的LiNbO_3(PPLN)和高反射​​器组成。腔内加倍光纤激光器由FB泵浦的580 mW尾纤光纤二极管在974 nm处通过FBG泵浦。光纤端的Yb激光发射聚焦在高反射镜上,提供光反馈并形成谐振器。 PPLN放置在形成腰部的平面端镜附近,以增加基本强度。可以通过在增益光纤的带宽内改变FBG来选择发射波长。实验选择1017.6 nm的FBG。当放置5%输出耦合器代替高反射镜时,测得腔中基波的循环功率约为1500 mW。在508.8 nm处获得超过30 mW的稳定输出。从泵浦功率到可见光输出的光学效率约为5%。在没有功率反馈环路的情况下,超过2个小时的激光输出功率波动小于0.5%。测得的M〜2值为1.2。波长可选激光器将用于包括荧光显微镜,生物成像,流式细胞仪和光谱分析在内的应用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号