首页> 外文会议>Sensors and modeling in materials processing: Techniques and applications >Modeling of solidification and velocity of atomized molten oroplet during atomization and sary forming
【24h】

Modeling of solidification and velocity of atomized molten oroplet during atomization and sary forming

机译:雾化和稳定形成过程中雾化熔融Oroplet的凝固和速度建模

获取原文
获取原文并翻译 | 示例

摘要

The solidification behaviors and velocity of atomized droplets during flight is formulated by a mathematical model,in whihc the concept of transient nucleation is applied.During the flight,the droplet velocity shows a maximum,followed by an inflection phenomenon.The velocity of large droplet is lower than that of small droplet at shorter flight distance,and higher than that of small droplet t longer flight distance.the effect of the gas flow pattern is more significant at longer flight distnace than at shorter flight distance At a given flight distance,large droplet has higher temperatue than small droplets prior to nucleation.Lare droplet has higher nucleation temperature than small droplet.medium size droplet flies over the shortest flight distance before the nucleation stars.At ht eend of recalscene,large droplet has less solid fraction than small droplet has.
机译:通过数学模型来描述飞行过程中雾化液滴的凝固行为和速度,并应用了瞬态成核的概念。在飞行过程中,液滴速度表现出最大值,随后出现拐点现象。大液滴的速度为在较短的飞行距离下比小液滴要低,而在较长的飞行距离下比小液滴要高。在较长的飞行距离下,气流模式的影响比在较短的飞行距离下更显着。在成核之前比小液滴具有更高的温度。稀有液滴比小液滴具有更高的成核温度。中等大小的液滴在成核星之前以最短的飞行距离飞行。在re烯之后,大液滴的固体分数比小液滴少。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号